steering wheel AUDI A4 1998 B5 / 1.G Ignition Switch Lock Cylinder Workshop Manual
Page 3 of 7
94-42
Removing
- Remove driver's-side airbag unit and steering
wheel.
Repair Manual, Body Interior, Repair Group
69
- Remove steering column switches Page 94
-37
.
- Insert spare or shop key and switch ignition on: access hole will appear
in front of switch next to ignition key slot.
Installing - Insert length of steel wire or small screwdriver (approx. 2 mm dia.) as
far as it will go, as illustrated, and pull lock cylinder out of steering lock
housing in direction of arrow.
- Ignition switch must be in "ignition on" position.
-
Push lock cylinder with ignition key all way into steering lock housing
Pa
ge 3 of 7 I
gnition switch lock c
ylinder, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.10
Page 4 of 7
and press in firmly until catch engages audibly.
- Install steering column switches and steering wheel.
Pa
ge 4 of 7 I
gnition switch lock c
ylinder, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.10
Page 5 of 7
94-43
Ignition switch, removing and installing
Removing
Note:
It is not necessary to remove the lock cylinder.
- Disconnect battery Ground (GND) strap.
- Remove driver's-side airbag unit and steering
wheel.
Repair Manual, Body Interior, Repair Group
69
- Remove steering column switche Page 94
-
37
.
- Disconnect harness connector from
ignition/starter switch.
Installing - Remove sealing paint from threads of screws -A-.
- Loosen two screws (arrows -A-) slightly and pull ignition/starter switch
out of housing in direction indicated (arrow).
Pa
ge 5 of 7 I
gnition switch lock c
ylinder, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.94.10