belt AUDI A4 1998 B5 / 1.G Rear Seats Workshop Manual
Page 8 of 19
72-64
Split rear backrest (Avant m.y. 1998 ),
removing and installing
1 -
2/3 rear backrest
Removing:
- Remove rear seat page 72
-57
.
- Disconnect harness connector to belt
tensioner Fig. 2
.
- Remove bolt -14-.
- Remove bolt -8- and remove center
mounting bracket clip -7-.
- Lift rear backrest out of center mounting
bracket -9- and pull toward center of car
out of fitting -4-.
Installing:
Installation is the reverse of removal
2 -
1/3 rear backrest
- Remove bolt -8- and remove center
mounting bracket clip -7-.
- Lift rear backrest out of center mounting
bracket -9- and pull toward center of car
out of fitting -4-.
Pa
ge 8 of 19 Rear seat
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.3
Page 10 of 19
72-66
Fig. 2 Disconnecting harness connector for belt tensioner
- Press catches -2- and disconnect harness connector -1- in direction of
arrow.
Pa
ge 10 of 19 Rear seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.3