ABS AUDI A4 1998 B5 / 1.G Seatbelts Workshop Manual

69-21

Installing


Make sure retaining tabs -1- (2x) fully engage.
Make sure rear lug engages in notch -6-.
Reverse mounting protection -5- must point toward center of
vehicle.
Pa
ge 27 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1

69-30


Rear lower anchors, installing
Notes: 1 -
Rear lower anchor bracket
- Remove rear seat page 72
-57
- Disconnect connectors
- Remove bolts -4- (2x).
2 -
Bolts (4x)
30 Nm (22 ft lb)
- Mount rear lower anchor bar -1- with
bolts -2- fastened into threaded holes in
body floor panel. To install solid rear backrest, push tabs
behind rear lower anchor bracket. If rear lower anchor is retrofitted, it may be
necessary to flatten tab in vise down to
about 3 mm page 72
-58

Inside anchors are not recommended for
attaching rear lower anchors of a LATCH
seat in the middle position. The three-point
lap/shoulder belt should be used.
Pa
ge 36 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1

69-35


Rear lower anchors, installing
Notes: 1 -
Rear lower anchor bracket
- Remove rear seat page 72
-57
- Disconnect connectors
- Remove bolts -4- (2x).
2 -
Bolts (4x)
30 Nm (22 ft lb)
- Mount rear lower anchor bar -1- with
bolts -2- fastened into threaded holes in
body floor panel. To install solid rear backrest, push tabs
behind rear lower bracket. If rear lower anchor is retrofitted, it may be
necessary to flatten tab in vise down to
about 3 mm page 72
-58

Inside anchors are not recommended for
attaching rear lower anchors of a LATCH
seat in the middle position. The three-point
lap/shoulder belt should be used.
Pa
ge 41 of 41 Seat belts11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.69.1