fuel AUDI A4 1998 B5 / 1.G Suspension Mount ABS Workshop Manual

45-32

Installing

- Replace clamping sleeve page 45
-30
item - 2
-.

- Grease ABS wheel speed sensor all around with
assembly paste before inserting. Then, press in
by hand until fully seated.

- Reconnect ABS wheel speed sensor cable and
route cable as when removed.
When routing the ABS wheel speed sensor
cable, pay attention to the following points:

- Route ABS wheel speed sensor cable -1- below brake line -2- on left
and right sides in area shown.
- On left side, maintain clearance of about 2 cm (3/4 in.) between heat
shield for exhaust system, and ABS wheel speed sensor cable.

- On right side, route ABS wheel speed sensor cable -1- between fuel
lines -2-.
- Install wheel and tighten wheel bolts to 120 Nm (89 ft lb).
Pa
ge 11 of 20 Sus
pension mounted ABS com
ponents
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.45.4