ECU AUDI A4 1998 B5 / 1.G Suspension Power Steering Pump Remove And Install Workshop Manual
Page 4 of 20
48-46
Lock carrier, moving to service position
1 -
Bolt (6x)
50 Nm (37 ft lb)
2 -
Bolt 50 Nm (37 ft lb)
3 -
Bolts (4x) 8 Nm (71 in. lb)
4 -
Bolts (2x) 8 Nm (71 in. lb)
5 -
Access hole for 3369 support tool
6 -
Hole in front end For securing lock carrier in service position
7 -
Lock carrier
8 -
Weather stripping for hood
9 -
Bowden cable for hood
10 -
Holes in side panel
Pa
ge 4 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9
Page 6 of 20
48-48
Removing ribbed belt on vehicles with 4-cyl.
gasoline engine
CAUTION!
Mark the running direction before removing. Reinstalling a used belt
in reversed running direction could damage the belt.
Removing ribbed belt on vehicles with 4-cyl. Diesel engine - Move tensioner in direction of arrow to loosen ribbed belt.
- Secure using 3204 drift.
CAUTION!
Mark the running direction before removing. Reinstalling a used belt
in reversed running direction could damage the belt. - Move tensioner in direction of arrow to loosen ribbed belt.
Pa
ge 6 of 20 Power steerin
g pum
p, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.9