AUDI A4 1998 B5 / 1.G Suspension Stabilizer Bar Remove And Install Workshop Manual
Page 1 of 2
40-101
Stabilizer bar, removing and
installing
Removing
- Remove noise insulation panel.
- Remove nuts -1-.
- Remove connecting links from stabilizer bar.
- Remove nuts -2-.
Pa
ge 1 of 2 Stabilizer bar, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.10
Page 2 of 2
40-102
Installing
Tightening torques: - Install bushings and stabilizer bar.
Do not apply grease
Arrows on connecting links point in direction of travel
- If replacing stabilizer bar, check which suspension version vehicle is
equipped with.
Connecting link to stabilizer bar: 100 Nm (74 ft lb) (always use new
ribbed nuts) Nuts -2-: 25 Nm (18 ft lb) (always replace)
Pa
ge 2 of 2 Stabilizer bar, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.10