wheel AUDI A4 1998 B5 / 1.G Suspension Steering Fluid Check Bleeding Workshop Manual

48-22


Hydraulic fluid level,
checking; steering system,
bleeding and checking for
leaks

Hydraulic fluid level, checking


- With engine switched off, bring front wheels to
straight-ahead position.

Note:
The cap must be screwed on fully to obtain an accurate fluid level
reading. - Remove cap.
- Wipe dipstick using clean cloth.
- Re-install cap hand tight and remove again.
Pa
ge 1 of 5 H
ydraulic fluid level, checkin
g; steerin
g system, bleedin
g and checkin
g for leaks
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.5

48-24

Steering system, bleeding


- Check hydraulic fluid level and top off if
necessary page 48
-22
.

- Raise vehicle until front wheels can move
freely.

- With engine switched off, turn steering wheel
from lock-to-lock 10 times.

- Check hydraulic fluid level and top off if
necessary page 48
-22
.

- Lower vehicle.

- Start engine.

- Turn steering wheel from lock-to-lock 10
times.

- Check hydraulic fluid level and top off if
necessary page 48
-22
.
Any remaining air in steering system will
dissipate while driving over the next 10-20 km (6-
12 miles).
Pa
ge 3 of 5 H
ydraulic fluid level, checkin
g; steerin
g system, bleedin
g and checkin
g for leaks
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.5