lock AUDI A4 1999 B5 / 1.G 01A Transmission Assembly Workshop Manual
Page 5 of 27
34-47
Input shaft ball bearing and multi-function
switch, removing and installing
1 -
Transmission housing
With differential and flange shaftsRemoving and installing flange shafts
Page 39
-1
Removing and installing differential
Page 39
-16
Removing and installing speedometer
Vehicle Speed Sensor (VSS) Page 39
-
13
Removing and installing speedometer drive
gear Page 39
-14
Breather installation position Fig. 1
2 -
Torx bolt
Always replace35 Nm (26 ft lb)Self-locking
3 -
Guide sleeve Installed with O-ring and seal for input shaft
Page 30
-20
4 -
Dished washer
Pa
ge 5 of 27 Transmission, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.5
Page 7 of 27
34-48
5 -
Circlip
Determining thickness and input shaft,
adjusting Page 35
-17
6 -
Input shaft ball bearing
Removing and installing Page 34
-55
7 -
Circlip
Determining thickness and input shaft,
adjusting Page 35
-17
8 -
Input shaft
Removing and installing Page 34
-51
Disassembling and assembling Page 35
-1
Adjusting Page 35
-17
Servicing input shaft ball bearing Page 35
-1
9 -
Socket-head bolt
25 Nm (18 ft lb)
10 -
Locking plate For multi-function switch
11 -
Multi-function switch
Pa
ge 7 of 27 Transmission, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.5
Page 8 of 27
34-49
12 -
Multi-function switch harness connector
13 -
Socket-head bolt
10 Nm (7 ft lb)
14 -
Cover for shift rod Removing and installing Page 34
-79
15 -
Gear lock for 5th and reverse gear
Removing and installing Page 34
-86
Pa
ge 8 of 27 Transmission, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.34.5