light AUDI A4 1999 B5 / 1.G 01A Transmission Differential Assembly Workshop Manual

39-123


6 -
Small tapered roller bearing inner race1)
Removing Fig. 3Installing Fig. 4
7 -
Bolt
Always replaceLightly tighten bolts, then tighten diagonally
to correct torque 60 Nm (44 ft lb) + 1/8 turn (45 )Allocation parts catalog
8 -
Differential housing1)
9 -
Ring gear1)
Matched with pinion shaft (in ring gear and
pinion set) Select correct version according to code
letters parts catalog Remove differential housing using mandrel
Fig. 9

Installing on differential housing Fig. 10
10 -
Roll pin
For securing differential bevel gear shaft
for differential bevel gears Drive in flush
Pa
ge 4 of 14 Differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.15

39-126


Fig. 1 Removing small tapered roller bearing outer race from
final drive housing
- After removing, check shims for damage.

Fig. 2 Pressing small tapered roller bearing outer race into rear
final drive housing (drive in to stop)
- Using VW295 needle bearing drift, lightly tap outer race into place.
- Drive in until stop is reached as shown in illustration.
Pa
ge 7 of 14 Differential, disassemblin
g and assemblin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.15