differential AUDI A4 1999 B5 / 1.G 01A Transmission Final Driveshaft Service Workshop Manual
Page 6 of 10
39-72
Removing
- Remove heat shield above driveshaft.
- Remove heat shield for driveshaft from cover of Torsen differential
(arrows).
Note:
Marking the shaft is only necessary if the same driveshaft will be re-
installed. - Check for factory color markings marked on driveshaft and
driveshaft/flange at rear final drive drive flange. If not, mark position of
driveshaft flange (arrow -A-) in relation to drive flange final drive (arrow
-B-) with paint.
- Loosen mounting bolts of both driveshaft flanges.
Pa
ge 6 of 10 Driveshaft, servicin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.39.8