AUDI A4 1999 B5 / 1.G 01V Transmission OBD Functions User Guide
Page 11 of 13
01-8
      
On Board Diagnostic (OBD), technical 
data
 
     
Memory  
  
Permanent memory  
yes   
Data output    
Rapid data transfer  
Blink code output  yes  
no   
Output Diagnostic Test Mode  yes  
Basic setting  no  
Coding control module  yes  
Read measuring value block  yes  
     
Electrical/electronic component locations   
Page 01
-11
  
Pa
ge 11 of 13 On Board Dia
gnostic 
(OBD
), function
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.1 
Page 12 of 13
01-9
 On Board Diagnostic II (OBD II), functions
 
Note:  
The following modes can be selected via address word 33: 
Mode  
Function  
1   Transmit diagnostic data:  
Only certain individual test values can be read. Read the the measuring value block by using address word 02, 
function 08. 
2   Not applicable  
3   Check DTC memory:  Only emissions-influencing malfunctions are indicated immediately or after two driving cycles (Dcy), depending 
on the malfunction, via the corresponding P-codes. Check DTC memory by using address word 02, function 02. 
4   Erase DTC memory:  DTC memory can be erased, even if it has not previously been read. Erase DTC memory by using address word 
02, function 05. 
5   Not applicable  
6   Not applicable  
7   OBD test results, continuously monitored:  Emissions-related malfunctions can be read, even if these malfunctions have not existed long enough for the 
MIL to be switched on. 
Pa
ge 12 of 13 On Board Dia
gnostic 
(OBD
), function
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.1 
Page 13 of 13
01-10
 
Mode  
Function  
8  
Not applicable 
9   This mode only applies as of model year 2000.  The first value indicates the Part No. and the program or data status of the Transmission Control Module (TCM).The second value indicates a checking summation, for instance A357. This value is calculated internally and 
can be disregarded. 
Note:  
There is no further detailed information about OBD in this section. 
Pa
ge 13 of 13 On Board Dia
gnostic 
(OBD
), function
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.1