battery AUDI A4 1999 B5 / 1.G ATW Engine Ignition System User Guide
Page 52 of 59
28-48
If LED does not blink:
Checking voltage supply
- Disconnect connector at Camshaft Position
(CMP) sensor.
Checking signal wire - Connect multimeter for voltage measurement as follows:Harness connector
Terminal
Measure to
1 Engine Ground (GND)
- Switch ignition on.
Specification: about 5 V
- Connect multimeter for voltage measurement as follows:
Harness connector
Terminal
Measure to
2 Engine Ground (GND)
- Switch ignition on.
Specification: approx. battery voltage
Pa
ge 52 of 59 I
gnition s
ystem, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.28.1