buttons AUDI A4 1999 B5 / 1.G ATW Engine Motronic Fuel Injection Syst
Page 31 of 81
24-29
      
Note:  
     
Idle speed cannot be adjusted.
     Idle speed is checked during basic setting of 
the engine. 
     During basic setting, the Evaporative Emission 
(EVAP) canister purge regulator valve (EVAP 
valve -N80-) is closed and the A/C compressor 
is switched off 
     
Test sequence  
     
-  Check DTC memory   Page 01
-16
. There must 
not be any DTCs stored, repair malfunctions if 
necessary, erase DTC memory, switch engine 
off and start again, road test vehicle and check 
DTC memory again as a control measure. 
     
-  Let engine continue to run at idle.
     
WARNING! 
     
The electric fan for the radiator must not be 
running. Rapid data transfer 
HELP
Select function XX
    
When indicated on display  
- 
Press buttons -0- and -4- to select "Initiate basic setting" and press -Q- 
Pa
ge 31 of 81 Motronic fuel in
jection s
ystem, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.1 
Page 33 of 81
24-30
 
Basic Settin
g 
Q
Enter display group number XXX
    
When indicated on display  
-  Press buttons -0-, -5- and -6- to select "display group number 056" and 
press -Q- button to confirm input. 
System in basic setting 56  
1 
2 
3 
4 
    
When indicated on display  
-  Check whether the engine speed in display field 1 (actual engine speed) is 
within tolerated range. 
  
Display fields  
  
1   2   3   4  
Display group 056: Idle stabilization at operating temperature  
Display  
xxx /min  
xxx /min   x.x %   X X X X X  
Indicated  
Engine speed (actual)  
Engine speed 
(specified)  Idle control  
Torque 
change  Operating conditions  
Specified 
value  FWD: 740 to 860 RPM  
AWD: 800 to 920 RPM  FWD: 800 RPM  
AWD: 860 RPM  x.x %   0 0 0 0 0  
Note  
If specified value is not obtained 
 Page 24
-32
   
      Significance of numbers   
Page 24
-32
   Pa
ge 33 of 81 Motronic fuel in
jection s
ystem, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.1 
Page 70 of 81
24-61
       Component location   Overview of component 
locations  Page 24
-5   
     
Test requirements: 
     
Coolant Temperature at least 80 C. 
     
Electrical consumers switched off (radiator 
fan must NOT run during test). 
     A/C switched off. 
     
Checking function  
     
-  Connect VAS5051 tester or VAG1551 scan tool 
and select control module for engine electronics 
using "address word" 01   Page 01
-10
 . Engine 
must run at idle. 
Rapid data transfer 
HELP
Select function XX
    
When indicated on display  
-  Press buttons -0- and -4- to select "Initiate basic setting" and press -Q- 
button to confirm input. 
Basic Setting 
Q
Enter displa
y group number XXX
    
When indicated on display  
-  Press buttons -0-, -0- and -2- to select "display group number 002" and 
press -Q- button to confirm input. When indicated on display  
Pa
ge 70 of 81 Motronic fuel in
jection s
ystem, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.1 
Page 80 of 81
24-69
      
Test sequence  
     
-  Connect VAS5051 tester or VAG1551 scan tool 
and select control module for engine electronics 
using "address word" 01   Page 01
-10
 . Engine 
must run at idle. 
Rapid data transfer 
HELP
Select function XX
    
When indicated on display  
-  Press buttons -0- and -8- to select "Read Measuring Value Block" and 
press -Q- button to confirm input. 
Read measurin
g value block 
Q
Enter displa
y group number XXX
    
When indicated on display  
-  Press buttons -0-, -0- and -1- to select "display group number 001" and 
press -Q- button to confirm input. 
Read Measuring Value Block 1  
1 
2 
3 
4
    
Indicated on display(1 to 4   display fields)  
If engine speed decreases:  -  Make note of engine speed in display field 1.
-  Spray intake system parts with engine leak detection spray in a 
systematic manner. 
-  Check sprayed part of intake system for leaks, and eliminate error.
Pa
ge 80 of 81 Motronic fuel in
jection s
ystem, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.1 
Page 81 of 81
24-70
      
- 
Press  button.Rapid data transfer 
HELP
Select function XX
    
Indicated on display (function selection):  
-  Press buttons -0- and -6- to select "End output" and press -Q- button to 
confirm input. 
-  Switch ignition off.
Pa
ge 81 of 81 Motronic fuel in
jection s
ystem, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.1