warning AUDI A4 1999 B5 / 1.G AWM Engine Exhaust System Components Workshop Manual
Page 19 of 41
26-19
Vehicles with front wheel drive:
WARNING!
Wear protective goggles. - Cut exhaust pipe at right angles using body saw, e.g. VAG 1523 A, at
position marked -arrow-.
- When installing, position clamp centrally over saw cut.
Installation position of clamp -1-: Horizontally, bolted connections
face rear left wheel Fig. 2
, Page 26
-8
- Ensure exhaust system is aligned stress-free Page 26
-34
.
- Tighten bolted connections on clamp evenly to 40 Nm.
Pa
ge 19 of 41 Exhaust s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.26.1
Page 20 of 41
26-20
Vehicles with all-wheel drive:
WARNING!
Wear protective goggles. - Cut exhaust pipe at right angles using body saw, e.g. VAG 1523 A, at
position marked -arrow-.
- When installing, position clamp centrally over saw cut.
Installation position of clamp -1-: Horizontally, bolted connections
face rear left wheel Fig. 2
, Page 26
-15
- Ensure exhaust system is aligned stress-free Page 26
-37
.
- Tighten bolted connections on clamp evenly to 40 Nm.
Pa
ge 20 of 41 Exhaust s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.26.1
Page 28 of 41
26-28
Note:
Coolant hoses -1- and -3- do not have to be disconnected. - Unbolt coolant expansion tank -2-, -arrows-.
- Disconnect wire to Engine Coolant level (ECL) Warning switch -F66-
and move coolant expansion tank to one side.
- Disconnect wiring connector for oxygen sensors and move wiring
aside.
1 - (brown) to oxygen sensor downstream of catalytic converter -G130-
2 - (black) to oxygen sensor upstream of catalytic converter -G39-
Pa
ge 28 of 41 Exhaust s
ystem com
ponents, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.26.1