torque AUDI A4 1999 B5 / 1.G AWM Engine Valve Gear Service Workshop Manual
Page 20 of 58
15-56
- Install toothed belt (adjust valve timing) Page
13
-44
.
Note:
Observe all instructions on removing and
installing the toothed belt Page 13
-40
.
Tightening torque
Component
Nm
Camshaft sprocket to camshaft 65
Pa
ge 20 of 58 Valve
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2
Page 25 of 58
15-61
Installing sealing ring with spring:
Note:
Do not oil sealing lip of oil seal.
All models: - Place guide sleeve 3241/2 onto camshaft journal.
- Slide oil seal over guide sleeve.
Tightening torques - Press in sealing ring with pressure sleeve 3241/1 as far as it will go. To
do this use bolt 3241/3.
- Install camshaft position sensor Page 15
-46
.
- Install toothed belt guard (upper section).
- Install lock carrier Page 13
-1 .
Component
Nm
Camshaft position sensor rotor to camshaft 25
Pa
ge 25 of 58 Valve
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2
Page 38 of 58
15-73
Tightening torques
Component
Nm
Bearing cap to cylinder head 10
Camshaft adjuster to cylinder head 10
Camshaft position sensor rotor to camshaft 25
Camshaft position sensor housing to
cylinder head 10
Camshaft sprocket to camshaft 65
Pa
ge 38 of 58 Valve
gear, servicin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.15.2