torque AUDI A4 1999 B5 / 1.G Brake Pedal Remove And Install Workshop Manual
Page 7 of 10
46-51
- Pull brake light switch out of pedal bracket.
- Remove clip page 46
-45
, item - 20 -.
- Turn nut -2- on brake light switch.
- Install brake light switch in pedal bracket, insert spring washer -3- and
nut -4-.
- Adjust clearance -A-, then tighten nut -4-.
Dimension -A- = 0.1 to 0.5 mm (0.004 to 0.020 in.)
Tightening torque: 4 Nm (35 in lb)
Pa
ge 7 of 10 Brake
pedal, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.7
Page 8 of 10
46-52
Pedal bracket with internal thread for brake light switch
Note:
Between the nut and the pedal bracket there is a spring clip (not shown),
Part No. N 012 042 4.
CAUTION!
Part numbers are listed here for reference only. Always check with
your Parts department for the latest information. 1 - Brake light switch
2 - Hex nut, M12 x 1.5
Part No. N 011 020 8
3 - Brake pedal
- Install brake light switch in pedal bracket.
- Adjust clearance -A-, then tighten nut -2-.
Dimension -A- = 0.1 to 0.5 mm (0.004 to 0.020 in.)
Tightening torque: 4.5 Nm (39 in lb)
Pa
ge 8 of 10 Brake
pedal, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU03.46.7