differential AUDI A4 1999 B5 / 1.G Engine Oil Level Checking Workshop Manual

Page 33 of 111

38

6-spd. manual transmission 01E all wheel
drive

Note:

For checking oil level the vehicle must be
stationary and on a level surface (e.g engine
off, standing on an alignment lift).
The oil level must be kept at the specified level.
The transmission may be damaged by over-
filling.

CAUTION!
If the oil level is too low, the transmission must be checked for leaks
and repaired. It is not sufficient to just top off oil.
CAUTION!
Part numbers are for reference only. Always check with your Parts
Dept. for the latest parts information. - Remove filler plug -B-, on differential cover, in front of drive axle flange.
- Check oil level using tool such as angled wire.
Specification: level 1 mm below bottom of oil filler hole.
- If there are no leaks, top up with gear oil: SAE 75 W 90 (synthetic oil),
part number G 052 145 S2 (1 liter).
Pa
ge 33 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6

Page 47 of 111

47

CAUTION!

Tires of same type and tread pattern must be
used on cars with All Wheel Drive (otherwise
risk of damage to central differential).

- Check tread wear pattern:
Tread wear pattern on front tires is an indication
of whether toe and camber settings need to be
checked:
"Feathering" on tread indicates incorrect toe.
If tread is worn on one side, this is usually
caused by incorrect camber.
If wear of this nature is noticed, check wheel
alignment.
Pa
ge 47 of 111 Descri
ption of wor
k
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.ME01.01.6