AUDI A4 1999 B5 / 1.G Interior Lights Avant Workshop Manual

Page 1 of 4

96-12


Interior lights, servicing (Avant) CAUTION!
Disconnect the battery Ground (GND) strap
before working on the electrical system.
Notes:

Before disconnecting the battery, determine the
correct coding for the anti-theft radio.
After reconnecting the battery, check and
activate the vehicle's electrical equipment
(radio, clock, comfort and convenience features,
etc.) as outlined in this Repair Manual or the
Owner's Manual.
Pa
ge 1 of 4 Interior li
ghts, servicin
g (Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.96.3

Page 2 of 4

96-13


Complete overview

1 -
Cargo area light
2 -
Rear interior/reading light, right and left
sides
3 -
Bulb for reading light
12 V, 5 W
4 -
Catch
5 -
Positioning hooks (2x)
6 -
Reading light harness connector
7 -
Positioning hooks (2x)
8 -
Cargo area light harness connector
9 -
Catch
10 -
Bulb for cargo area light 12 V, 10 W
Pa
ge 2 of 4 Interior li
ghts, servicin
g (Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.96.3

Page 3 of 4

96-14


Rear interior/reading lights, removing and
installing

Removing
Installing - Using screwdriver, carefully pry out
interior/reading light -2- from roof at catch -4-.
- Disconnect harness connector -6-.
- Remove bulb -3- from socket.
- During installation, insert positioning hooks -5-
and, on opposite side, make sure that catch -4-
engages audibly.
- Remainder of installation is in reverse order of
removal.
Pa
ge 3 of 4 Interior li
ghts, servicin
g (Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.96.3

Page 4 of 4

96-15


Cargo area light, removing and installing

Removing
Installing - Using screwdriver, carefully pry out cargo area
light -1- from roof at catch -9-.
- Disconnect harness connector -8-.
- Remove lens from lamp holder.
- To change bulb, remove bulb from clamp-type
socket.
- During installation, insert positioning hooks -7-
and, on opposite side, make sure that catch -9-
engages audibly.
- Remainder of installation is in reverse order of
removal.
Pa
ge 4 of 4 Interior li
ghts, servicin
g (Avant
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.EE01.96.3