radio AUDI A4 1999 B5 / 1.G Suspension Steering Gear Remove And Install Workshop Manual
Page 1 of 10
48-5
Steering gear, removing and
installing
Special tools, test equipment and auxiliary
items
Repair Manual, Body Exterior and Repair
Manual, Body Interior
VAG1907 centering tool
3094 hose clamps
Removing
- Remove plenum chamber cover.
- Remove battery.
CAUTION!
Before disconnecting the battery, determine
the correct coding for the anti-theft radio.
- Remove driver's side storage compartment:
Repair Manual, Body Interior, Repair Group
Pa
ge 1 of 10 Steerin
g gear, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.2
Page 10 of 10
48-13
-
Install eccentric Torx bolt, engage
counterclockwise and tighten nut.
- Remove VAG1907 centering tool from steering gear.
1 - Socket-head bolt (screw plug)
2 - Threaded hole in steering gear
- Install socket-head bolt -1- to seal off steering gear.
Tightening torque: 13 Nm (10 ft lb)
- Tighten nut on tensioning bolt.
Tightening torque: 40 Nm (30 ft lb)
- Install driver's side storage compartment.
- Install wheel housing cover.
- After completely installing steering gear remove 3094 hose clamps.
- Install battery and enter code for radio if necessary.
- Check level of hydraulic fluid page 48
-22
.
- Bleed steering system page 48
-24
.
- Check steering system for leaks page 48
-25
.
- Check wheel alignment page 44
-6 .
Pa
ge 10 of 10 Steerin
g gear, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.48.2