AUDI A4 2000 B5 / 1.G 01A Transmission Clutch Mechanism Service Owner's Manual
Page 21 of 22
Top-off brake fluid reservoir to "max." marking
with brake fluid before bleeding clutch system.
- Pull clutch pedal back to rest position.
- Connect VAG1238B brake filling and bleeding
appliance or VAG1869 but do not switch on.
- If necessary, remove noise insulation panel
under transmission.
Pa
ge 21 of 22 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.30.1
Page 22 of 22
30-19
CAUTION!
Always comply with disposal regulations.
Note:
While bleeding, make sure bleeder hose remains correctly routed. - Connect bleeder hose -A- to clutch slave cylinder (arrow) and open
bleeder valve.
- Connect bleeder hose with pressure hose to collector bottle.
- Switch on bleeding appliance and let approx. 100 cm3 (approx. 3.4 fl.
oz) brake fluid flow into suitable collection reservoir.
Work pressure 2.5 bar (36 psi)
- Close bleeder valve.
Tightening torque: 4.5 Nm (40 in. lb).
- Depress clutch pedal several times after completion of bleeding
process.
- Bleed system again if necessary.
Pa
ge 22 of 22 Clutch mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM02.30.1