multi-function transmission AUDI A4 2000 B5 / 1.G 01V Transmission Electrical And Electronic Components Workshop Manual

01-13


6 -
Multi-function Transmission Range (TR)
switch -F125-
Location, removing and installing page 01
-27
, Fig. 8

Checked via On Board Diagnostic (OBD)
7 -
Sensor for Transmission RPM -G182- Location, removing and installing page 01
-29
, Fig. 11

Checked via OBD
Pa
ge 3 of 23 Electrical/electronic com
ponents and locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.2

01-27


Location: The multi-function switch -1- is located on left at transmission;
Multi-pin connector for multi-function switch -arrow-.
Multi-function TR switch, removing and installing
Repair Manual, 5 Spd. Automatic Transmission 01V, Repair Group 38
Fig. 8 Multi-function Transmission Range (TR) switch -F125-

Installation location: The tiptronic switch is integrated into the conductor
strip of the symbol insert in the cover of the shift mechanism.
Note:
This switch is not installed on shift mechanisms without tiptronic function.
The switch consists of 3 hall-effect sensors (-A-, -B-, -C- ), which are
activated via a magnet on the lateral gate cover of the gate cover. Fig. 9 Tiptronic switch -F189-
A - Sensor for down-shift
B - Sensor for Tiptronic-recognition
C - Sensor for up-shift
Pa
ge 17 of 23 Electrical/electronic com
ponents and locations
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.2