battery AUDI A4 2000 B5 / 1.G 01V Transmission OBD Workshop Manual
Page 2 of 10
01-35
To reduce the risk of personal injury and/or
damage of electric and electronic
components, always observe the following:
Always switch the ignition off before connecting
or disconnecting testers or measurement tools.
It is possible that the control module will
recognize a malfunction and store a DTC during
some tests. After completing all tests and
repairs, check DTC memory and erase the
memory.
Always switch ignition off before disconnecting
and connecting the battery to avoid damaging
the transmission control module.
Pa
ge 2 of 10 On Board Dia
gnostic
(OBD
), initiatin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.3
Page 4 of 10
damage and repair if necessary.
- Check battery Ground (GND) strap and Ground
strap between battery and transmission.
Pa
ge 4 of 10 On Board Dia
gnostic
(OBD
), initiatin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.3