seat adjustment AUDI A4 2000 B5 / 1.G 01W Transmission Differentila Disassemble And Assemble Workshop Manual

39-22


Note:
Adjustment shims are damaged when outer race is driven out. Replace
adjustment shims. Fig. 1 Removing right tapered roller bearing outer race from
transmission housing (for transmissions with polygon
bearing)
- To drive out, place punch pin alternately on cut-outs (arrows) on
bearing seat.

Fig. 2 Removing right tapered roller bearing outer race from
transmission housing for transmissions without polygon
bearing
- Turn webs -A- and -B- out until they sit on outer race within recess in
transmission.
- After removing, check adjustment shims for damage.
Pa
ge 9 of 15 Differential, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM01.39.4