bearing AUDI A4 2000 B5 / 1.G AEB ATW Engines Engine Assembly Workshop Manual

13-6


11 -
Circlip
For viscous fan bearingRemoving and installing Page 13
-20
12 -
Bolt for belt pulley
10 Nm (7 ft lb)
13 -
Bearing For viscous fanRemoving and installing Page 13
-20
14 -
T-head bolt
Insert before installing bracket for
generator, power steering pump and
viscous fan
15 -
Nut 40 Nm (30 Nm)
16 -
Bolt 25 Nm (18 ft lb)
Pa
ge 6 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1

13-18

V-belt, removing and installing


Lock carrier in service position Page 13
-
17


Ribbed belt free of tension Page 13
-15


Removing

- Remove noise insulation panel (arrows).
- Remove viscous fan (with belt pulley) from bearing Page 13
-14
, Fig.
1
.

- Remove belt pulley for coolant pump. Use drift (arrow) to counterhold
at belt pulley for power steering pump.
- Remove V-belt.
Pa
ge 20 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1

13-20

Bearing for viscous fan in mounting
bracket, removing and installing


Lock carrier in service position Page 13
-1

Special tools and equipment

Hex nut from 3301 assembly tool
Extractor pipe from 3350 installation device
3367 press out tool for viscous clutch fan
bearing bushing

Removing

- Remove ribbed belt Page 13
-15
.

- Remove viscous fan (together with belt pulley)
Page 13
-14
, Fig. 1
.

- Remove circlip (arrow) from bearing bushing.
Pa
ge 22 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1

13-21


Installing
Installation is the reverse of removal, noting the following: - Pull bearing from bracket using hex nut from 3301 assembly tool, bolt
from 3367 press out tool for viscous fan bearing bushing and 3350
extractor pipe.

- Press in bearing using 3367 press out tool for viscous fan and hex nut
from 3301 assembly tool.
- Using circlip pliers, install circlip in viscous fan bracket.
- Install viscous fan Page 13
-14
, Fig. 1
.
Pa
ge 23 of 38 En
gine, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.1