AUDI A4 2000 B5 / 1.G AFC Engine Multiport Fuel Injection System Servising User Guide
Page 11 of 13
connector test kit.
For any work affecting the Engine Control
Module (ECM):
BEFORE disconnecting the ECM harness
connector, switch the ignition OFF and WAIT
at least 20 seconds. Failure to do so may
damage the ECM.
DO NOT connect any outside voltage source
to stimulate an output signal at the ECM.
Pa
ge 11 of 13 Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.2
Page 12 of 13
24-15
Rules of cleanliness
CAUTION!
Whenever carrying out work on the fuel
supply and fuel injection systems, carefully
observe the following five rules of
cleanliness.
1 - Thoroughly clean fuel system line and hose
connections and the surrounding area before
disconnecting.
2 - Place removed components on a clean
surface and cover. Use plastic sheeting or paper.
Do not use fluffy rags that could leave lint!
3 - Carefully cover over or seal any components
that have been opened if repairs are not carried
out immediately.
4 - Install only clean parts:
Do not remove replacement parts from the
packaging until immediately before they are to
be installed.
Do not use parts that have been stored without
packaging (e.g. in toolboxes, etc.).
5 - When the fuel system is opened:
Pa
ge 12 of 13 Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.2
Page 13 of 13
Avoid working with compressed air whenever
possible.
Avoid moving the vehicle if possible.
Pa
ge 13 of 13 Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU01.24.2