battery AUDI A4 2000 B5 / 1.G AHA Engine Throttle Valve Control Module Checking Workshop Manual
Page 29 of 36
24-148
Continuation (with measured voltage)
If measured voltage was approx. 5 volts:
If measured voltage was approx. battery positive voltage (B+): - Disconnect 8-pin harness connector from throttle valve control module
-J338-.
- Connect multimeter US1119 (Fluke 83 or equivalent), using adapter
cables from VW1594 connector test kit.
- Measure resistance to check for short circuit between test box sockets
62 (power supply) and 75 (signal wire).
Test box sockets 62 and 75
Specified value:
- Check wiring at 8-pin connector, terminal 5 for short circuit to battery
B+.
Pa
ge 29 of 36 Throttle valve control module, checkin
g
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU03.24.2