sensor AUDI A4 2000 B5 / 1.G APB Engine Motronic Multiport Fuel Injection System Servising Owner's Manual
Page 83 of 90
24-72
Checking voltage supply to Mass Air Flow
(MAF) sensor
- Disconnect harness connector from air mass
meter.
Note:
The mass air flow sensor receives its voltage supply via the fuel pump
relay.
If the reading does not match the battery voltage:
Electrical Wiring Diagrams, Troubleshooting & Component Locations - Connect hand-held multimeter (voltage measurement range) between
engine Ground (GND) and socket 2 of connector.
- Operate starter briefly.
Specification: approx. battery voltage
- Check for open circuit or short to Ground (GND) in wiring between fuel
pump relay and socket 2 on connector via fuse. Repair if necessary.
Pa
ge 83 of 90 Motronic Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1
Page 85 of 90
24-74
Checking wiring for mass air flow sensor
Note:
The wiring test includes also testing the signal
wire.
- Connect VAG1598/31 test box to wiring harness
for engine control module. Do not connect to the
engine control module itself Page 24
-20
.
- Check for open circuit and short to B+ or Ground (GND) in the following
wiring connections: Connector for MAF sensor -G70,
socket
VAG1598/31 test box,
socket
3 27
4 53
5 29
Pa
ge 85 of 90 Motronic Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1
Page 86 of 90
24-75
Resistance in wiring: max. 1.5
- Repair short circuit or open circuit if
necessary.
Electrical Wiring Diagrams, Troubleshooting &
Component Locations
Specification: infinity (open circuit)
- If wiring and voltage supply are OK, replace
Mass Air Flow (MAF) sensor -G70.
Pa
ge 86 of 90 Motronic Multi
port Fuel In
jection
(MFI
) system, servicin
g
11/22/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU04.24.1