ECU AUDI A4 2000 B5 / 1.G AWM Engine Sealing Flanfes And Flywheel Drive Plate Workshop Manual
Page 3 of 20
13-49
8 -
Securing bolt for dual-mass flywheel or
drive plate
Always replaceTightening torque for dual mass flywheel
Page 13
-63
Tightening torque for drive plate (vehicles
with automatic gearbox) Page 13
-66
9 -
Intermediate plate
Must be located on dowel sleevesDo not damage/bend when assembling
Pa
ge 3 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2
Page 11 of 20
13-57
Removing
Engine in vehicle
Lock carrier must be in service position
Page 13
-1 .
- Remove toothed belt Page 13
-40
.
CAUTION!
The air conditioner refrigerant circuit must
not be opened.
- Disconnect A/C compressor from bracket and
secure to body with wire.
- Unbolt bracket for A/C compressor -Item 5 -,
Page 13
-15
- Unbolt stop for torque reaction support -arrows-.
Pa
ge 11 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2
Page 18 of 20
13-64
Drive plate
Special tools and equipment
Removing
Counter hold VW 558 Hex bolt M8 x 45 and two M10 hex nutsCaliper gauge or depth measure
- Secure counter hold tool VW 558 to drive plate with hex bolt M8 x 45 -
Item 2-. Place two M10 hex nuts between counter-hold tool and drive
plate.
- Mark position of drive plate relative to engine.
- Unbolt drive plate.
Pa
ge 18 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2
Page 19 of 20
13-65
Installing
- Place drive plate in position with shim -2- and washer -1-. Lug -arrow-
must face towards torque converter.
- Insert at least 3 old securing bolts and tighten to 30 Nm.
- Measure distance -a- at three points and calculate average value.
Specified value: 18.9 to 20.5 mm
Pa
ge 19 of 20 Sealin
g flan
ges and fl
ywheel/drive
plate, removin
g and installin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE06.13.2