AUDI A4 2000 B5 / 1.G AWM Engine Technical Data

00-1


Technical data

Engine number


The engine number ("Engine code number" and "serial number") is on the
left rear of the cylinder block.
Additionally, there is a sticker on the toothed belt guard with "Engine
code" and "Serial number".
The engine code is also included on the vehicle data sticker.
Note:
Furthermore, the engine code is stamped onto the front engine lifting eye
(visible after removal of engine cover).
Pa
ge 1 of 3
11/21/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triCODIP.htm

00-2

Engine data


Code letters
AWM
Production 04.2000 >
Capacity ltrs. 1.781
Output kW at rpm 125/5900
Torque Nm at rpm 225/1950 - 5000
Bore diameter mm 81.0
Stroke mm 86.4
Compression 9.3
RON
95
1)
Injection-/Ignition system Bosch Motronic
Knock control yes
On Board Diagnositc (OBD) yes
Oxygen sensor control yes
Catalytic converter yes
Charging yes

1) Regular unleaded petrol RON 91 can be used
but will cause a slight loss of power.
Pa
ge 2 of 3
11/21/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triCODIP.htm

00-3

Code letters
AWM
Exhaust gas recirculation system no
Intake manifold changeover no
Camshaft timing control yes
Secondary air inlet yes
Valve timing
with 1 mm valve lift and 0 mm valve
clearance
Inlet opens after TDC
18
Inlet closes after BDC
28 Exhaust opens before BDC
28 Exhaust closes before TDC
8
Pa
ge 3 of 3
11/21/2002 file://C:\DOCUME~1\Bear\LOCALS~1\Tem
p\triCODIP.htm