warning light AUDI A4 2000 B5 / 1.G Brakes ESP Bosch 5.3 User Guide

01-234

Code Control Module (function 07)


After installing a new ABS control module
(w/EDL) -J104- or a new steering angle sensor
-G85-, the ESP system must be coded again.
After the coding, the steering angle sensor
must be calibrated.
The coding of the ESP control module is used for
adaptation of the control module to the vehicle.
Coding is only possible if a dealership number is
stored in the VAG1551 scan tool.

Note:
If the control module is coded with code 00000 or
with a code that does not match the vehicle, the
ABS warning light -K47- and the traction control
indicator light -K86- remain continuously lit, and
the DTC 01044 - Control module incorrectly
coded - is stored in DTC memory of the control
module.
Before the control module can be coded, "Login
Procedure" function 11 must be successfully
carried out using the VAG1551/1552 scan tool.
Pa
ge 20 of 27 Electronic Stabilization Pro
gram
(ESP
) Bosch 5.3
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU02.01.14