warning AUDI A4 2000 B5 / 1.G Rear Seats Workshop Manual
Page 18 of 19
72-74
Removing locking cylinder
Warning indicator
Ignition key is required to remove and install locking cylinder -3- Locking lever -4- removed
- Using screwdriver, lift catches while simultaneously pressing out
locking cylinder -3-. When rear backrest is locked, pin -6- is 1-2 mm above lock trim.If rear backrest is not locked, pin -6- is approx. 20 mm above lock trim
-1- and a red mark is visible.
Pa
ge 18 of 19 Rear seat11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.BD03.72.3