wheel alignment AUDI A4 2000 B5 / 1.G Suspension Wheel Bearing Housing Remove And Install Workshop Manual
Page 8 of 17
The vehicle must be standing on it's wheels
when loosening or tightening the bolt for the
drive axle. Otherwise the risk of an accident
exists.
- Check front suspension alignment and, if
necessary, adjust using VW/Audi approved
alignment equipment.
Pa
ge 8 of 17 Wheel bearin
g housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.5
Page 17 of 17
40-67
Wheel bearing housing, servicing with
VAG1459 B
There is an alternative to using the VAG1290 A
workshop press to service the wheel bearing
housing. VAG1459 B hydraulic wheel bearing
and wheel hub removal and installation tool
together with the VAG1459 B/2 accessory can be
used instead.
Advantages:
Wheel bearing housing does not need to be
completely disassembled.
Tie rod end remains in wheel bearing housing
and therefore wheel alignment does not need to
be carried out.
Pa
ge 17 of 17 Wheel bearin
g housin
g, removin
g and installin
g
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.SU01.40.5