air AUDI A4 2006 B7 / 3.G RNS_E Navigation System Manual

RADIO73
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Applies to vehicles: with Satellite Digital Audio Radio ServiceDelete stored stationsDelete individual stations
– Press the function button in the satellite radio
menu.
–Select Delete stored stations
page 71, fig.72.
–Select Delete individually.
– Rotate and press the control knob to delete individual
stations from the memory list.
Delete all stations
– Press the function button in the satellite radio
menu.
–Select Delete stored stations.
–Select Delete all. All entries on the memory list are
deleted.Applies to vehicles: with Satellite Digital Audio Radio ServiceSystem informationThe following system messages can be displayed:XM Satellite Radio
Sirius Satellite Radio
SETUPSETUP
System mes-
sages
Meaning
ANTENNA
No antenna is connected to the tuner, or
there are loose plug contacts on the
antenna cable.
UPDATING
Your system is being updating.
NO SIGNAL
The tuner is presently not receiving any
satellite signal.
LOADING
Yo u r p ro v i d e r i s s e n d i n g i n fo r ma t i o n w h ich
the system is currently storing.
OFF AIR
The station selected has shut down its pro-
gram (e.g. children's channel at night)
INVALID
The channel is invalid or not used.
System mes-
sages
Meaning
LINKING
The tuner is presently not receiving any
satellite signal.
CALL 888-539-SIRIUS
TO SUBSCRIBE
First possibility: the tuner has not been
enabled yet. Second possibility: the station
selected is not enabled, for example
because the station requires a subscrip-
tion.

Navigation (NAV) 120
– Select Select city center to navigate to the center of the
selected locality, or
– Select Input street name, Special destination in city or
Destination input on map to set more detailed destina-
tion criteria.
– Select Start route guidance
page 129.After you have started route guidance, you are offered up to three
routes
page 130, f i g .1 3 6 . S e l e c t o n e o f t h e r o u t e s b y r o t a t i n g a n d
pressing the control knob. If you do not select any of the routes
s u g g e s t e d , t h e r o u t e m a r k e d i s a u t o m a t i c a l l y i m p o r t e d a f t e r a d e l a y
once the trip has started or during the trip. The delay gives you the
opportunity to change the route selection one more time. You can
find additional information on route selection starting on
page 130.
Switch from the letter speller to the number speller to enter a city
with special characters (e.g. hyphen, apostrophe or period) page 125.
Selection “Select city center”
The Navigation System calculates route guidance to the center of
the city entered.
Selection “Input street name”
B y i n p u t t i n g t h e s t r e e t i n a c i t y, y o u c a n s p e c i f y t h e d e s t i n a t i o n m o r e
precisely.
After selecting the street, you can specify more detailed destination
criteria by inputting an Intersection, a House number or through
Enter destination on map
page 128.
If you would like to find a street independently of the city, select
Street after selecting the country in the destination entry menu.Selection “Special destination in city”
By selecting a special destination in the specified city, tourist attrac-
tions or public facilities (e.g. hospital, movie theater,) can be
selected directly as a destination.
If you would like to find a particular special destination indepen-
dently of the city, select Special destination after selecting the
country in the destination entry menu
page 126.
Selection “Destination input on map”
You can find destinations for a specified city from the map display.
If the map is being displayed to select a destination, the crosshairs
are in the center of the city in question. By moving the crosshairs
horizontally and vertically, you can set a new destination
page 149.
If additional detailed information is available for the selected point
on the map, you can display it using the Detail info function.
I f y o u a r e n a v i g a t i n g i n s i n g l e d e s t i n a t i o n m o d e , t h e Set as stopover
function is greyed out
page 139.
Yo u c a n a l s o Save to directory
page 135 the selected map destina-
tion
By inputting a street, you can predetermine the map location in
greater detail.
Tips


If you have entered a city in the speller display, you can confirm
the entry for this city by pressing and holding the control knob. Or,
y o u e n t e r p a r t o f a c it y a n d yo u a l re a d y r e c o g n i z e t h e d e s i re d c i t y i n
the speller display list, you can shift directly to the city list by
keeping pressure on the control knob.


Entered destinations can be saved
page 135.

Navigation (NAV) 122Selection “Special destination in city”
By selecting a special destination in the specified city, tourist attrac-
tions or public facilities (e.g. hospital, movie theater,) can be
selected directly as a destination.
If you would like to find a particular special destination indepen-
dently of the city, select Special destination after selecting the
country in the destination input menu
page 126.
Selection “Destination input on map”
You can find destinations for a specified city from the map display.
If the map is being displayed to select a destination, the crosshairs
are in the center of the city in question. By moving the crosshairs
horizontally and vertically, you can set a new destination
page 149.
If additional detailed information is available for the selected point
on the map, you can display it using the Detail info function.
Using the Set as stopover fu n c t io n , y o u c a n a l s o s e t t h e d e s t in a t io n
from the map as a stopover
page 139.
Yo u c a n a l s o Save to directory the selected map destination
By inputting a street, you can predetermine the map location in
greater detail.
Tips


If you have entered a city in the speller display, you can confirm
the entry for this city by pressing and holding the control knob. Or,
yo u e n t e r p a r t o f a c i t y a n d y o u a l re a d y re co g n i ze t h e d e s ir e d c i t y in
the speller display list, you can shift directly to the city list by
keeping pressure on the control knob.


Route plans that have been entered can be saved
page 137.

Navigation (NAV)125
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP Selection “Input street name”
By inputting the street in a city, the destination can be specified
more precisely.
After selecting the street, you can specify more detailed destination
criteria by inputting an Intersection, a House number or through
Enter destination on map
page 128.
If you would like to find a street independently of the city, select
Street after selecting the country in the main navigation menu.
Selection “Special destination in city”
By selecting a special destination in the specified city, tourist attrac-
tions or public facilities (e.g. hospital, movie theater,) can be
selected directly as a destination.
If you would like to find a particular special destination indepen-
dently of the city, select Special destination after selecting the
country in the main navigation menu
page 126.
Selection “Destination input on map”
You can find destinations for a specified city from the map display.
If the map is being displayed to select a destination, the crosshairs
are in the center of the city in question. By moving the crosshairs
horizontally and vertically, you can set a new destination
page 149.
If additional detailed information is available for the selected point
on the map, you can display it using the Detail info function.
You can select the Set as destination function, if you have set the
route guidance with stopovers. If you are navigating without stop-
over, the Set as stopover function is greyed out
page 139.
Yo u c a n a l s o Save to directory
page 135 t h e s e l e c t e d m a p d e s t i n a -
tion By inputting a street, you can predetermine the map location in
greater detail.
Tips
If you have entered a city in the s peller display, you can confirm the
entry for this city by pressing and holding the control knob. Or, you
enter par t o f a city and you a lre ady recognize the d esired city in the
speller display list, you can shift directly to the city list by keeping
pressure on the control knob.Entering street/city with special charactersFig. 130 Navigation: Switch from letter to number speller– In a destination input menu
page 117, fig.121, select
another Region from the list by rotating and pressing the
control knob.

Navigation (NAV)127
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– In a destination input menu
page 117, fig.121, enter
another Region as applicable.
–Select Special destination
page 117, fig.121.
–Select Find entry
page 126, fig.131 and enter the
name using the speller, or
–Select Te l e p h o n e n u m b e r, In immediate vicinity, In
vicinity of destination, Along the route or Regionwide.
– Select a subcategory or enter additional data for the
special destination.
–Select Set as destination. Th e s pe c i a l de s t i n a t i o n i s au to -
matically transferred to the route guidance.
– Geben Sie ggf. Enter stopovers for route guidance with
stopovers
page 139.
–Select Start route guidance
page 129.The special destinations stored on the navigation DVD (e.g. airports,
gas stations, etc.) can be selected.
Using the Find entry, you can input the name of the special destina-
tion with the speller.
When you confirm a selected special destination, it becomes the
new destination.
Selection “Telephone number”
When telephone number for the special destinations are stored on
the navigation DVD, you can enter these special destinations by the
telephone number.Selection “In immediate vicinity”
This special destination
page 126, fig.132 refers to the area
immediately surrounding the current vehicle position.
This function is especially useful for planning stopovers, for
example to find the nearest restaurant.
The list of special destinations displayed is sorted in ascending
order according to distance (as the crow flies) to your location. The
distance displayed for special destinations can differ considerably
from the driving distance.
Selection “In vicinity of destination”
After a destination has been entered in a menu for destination
in put, a s pecial des tina tion ca n be in the vicinity of the destination.
If no destination has been entered in the destination input menu,
this function is greyed out.
This special destination refers to a final destination already calcu-
lated and is useful, for example, when you are looking for a gas
station at your destination.
Selection “Along the route”
This special destination refers to route calculation. Special destina-
tions “Along the route” can only be selected during active route
guidance.
It is particularly suitable for setting a specific special destination
along the calculated route. Only special destinations situated
directly on the route are located.
Selection “Region-wide”
This special destination is not assigned to any city or previously
selected destination. You will receive a list of all possible special
destinations in each country. For example, you can obtain a list of
the possible airports for the specified region.

Navigation (NAV) 128
Tips

If you select a category (e.g. train station) and no selection is
listed, no special destination is available on the navigation DVD for
this category according to the restrictions you have set.


A f u n c t i o n m a y n o t b e s e l e c t e d ( “ g r e y e d - o u t ” ) i f i t i s n o t a v a i l a b l e
according to the restrictions you have set, or if not permitted by
local circumstances.
Destination input on mapFig. 133 Navigation: Destination on the mapFig. 134 Navigation: Setting map point as destination
– In a destination input menu
page 117, fig.121, enter
another Region as applicable.
–Press the Map control button.
– Press the control knob to switch to the map side menu

page 144.
– Change the scale if necessary
page 146.
– Activate the crosshairs
page 149 in the active side
menu by rotating and pressing the control knob.
– Use the crosshairs to the find the corresponding destina-
tion on the map.
– Press the button to deactivate the crosshairs.
RETURN

Navigation (NAV)129
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
– Confirm by rotating and pressing the control knob the
third map menu item (destination flag)
page 128,
fig.133.
–Select Set as destination
page 128, fig.134.
– Geben Sie ggf. Enter stopovers for route guidance with
stopovers
page 139.
–Select Start route guidance
page 129.If you enter a city in the destination input menu first, before you
press the control button with the Map function, the system jumps
to the center of the city entered on the map display.
Selection “Detail info”
If additional detailed information is available for the selected point
on the map, you can display it by selecting the Detail info function.
If the Detail info function is greyed out, no details are available on
the navigation DVD.
Selection “Set as stopover”
When you have activated Route with stopover, you can also select
the stopovers from the map.
If you have not activated Route with stopover, this function cannot
be selected (greyed out).
Selection “Save to directory”
The selected map position can also be imported into the directory.
You can assign this position to an existing directory entry or open a
new entry. With a new entry, first input a name using the speller.
Then you can input additional data on the entry. If you activate
Display as top destination, this entry is displayed in the destination
input menu
page 117, fig.121
page 133.
Tips


Th e d e s t i n a t i o n e n t r y f r o m t h e m a p i s a l s o a v a i l a b l e t o y o u i n t h e
city submenu and street submenu.


Yo u c a n a l s o s e t a m a p p o i n t w h i c h i s not l o c a t e d o n a s t r e e t ( e .g .
by means of the geo-coordinates) using the crosshairs. In this case,
the system tries to navigate as close as possible to this destination
using digitized streets.
Start route guidanceFig. 135 Navigation: Start route guidance– Enter all the necessary information for route guidance.
You can use the different options that have been
described
page 117.

Navigation (NAV) 130
– Select Start route guidance
page 129, fig.135, the
route is calculated and the map display is shown auto-
matically.
– Select one of the routes suggested in the single destina-
tion mode
page 130 on the map display by rotating
and pressing the control knob.
– In the route plan map display, confirm the route
suggested
page 132 by rotating and pressing the
control knob.After calculating route guidance, the Navigation System switches
a ut o ma t i c a l ly to ma p d i s p l a y m o d e . The ro u t e g u id a n c e i s s h o w n in
simplified form in the instrument cluster display
page 113. You
are additionally receive navigation voice prompts page 112.
When you have entered a final destination
page 119 and started
route guidance, you are offered up to three different routes to reach
your destination
page 119.
When you have entered a route plan and started route guidance,
you are shown the route with the different stopovers and various
information in the overview
page 132.
Entered destinations can be saved
page 135 and
page 137.
Route criteria
page 141 can be changed at anytime during guid-
ance, and the route will be recalculated.
If you do not complete route guidance you started, this route guid-
a n c e wi l l b e c o n t i n u e d t he n e x t t i m e t h e v e h i c l e i s s t a r t e d . Th is a l s o
applies to destinations entered which cannot be reached because of
local conditions (e.g. lake or tourist attraction). If you would like to
terminate this route guidance, select Cancel route guidance
page 132
Tips
Calculated destinations can also be changed in the map display by
moving the crosshairs
page 149
Single destination information before route guidanceFig. 136 Navigation: Example of map display after route has been calculatedWhen you have entered the destination data
page 117
and the road network allows, you are offered up to three
different routes to choose from.
– Select one of the optional routes by rotating the control
knob.

Navigation (NAV)133
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP terminate this route guidance, select Cancel route guidance
page 132Tips
Calculated destinations can also be changed in the map display by
moving the crosshairs
page 149.
To p d e s t i n a t i o nFig. 138 Navigation: Set entry as top destinationFig. 139 Navigation: Map display of a top destination (push pin)
– In a destination input menu
page 117, fig.121, select
the top destination desired from the list below the menu
item “Start route guidance”.
– Select Start route guidance.If you have activated the Display as top destination
fig.138 func-
tion when making entries in the directory (
page 135 or
page 103), they are listed
page 136 in a destination input menu
page 117, fig.121 under the menu item “Start route guidance” .
If you have activated the top destinations
page 155in the “Map
content” menu with a checkmark
, the top destinations you set are
indicated by a “push pin” on the map
fig.139.

Navigation (NAV) 144Th e fi g ure s
page 143, fig.15 0 a nd
page 143, fig.151 show you
the possible types of information in the map display:
Map orientation
Scale
Estimated distance to the next destination/stopover
Estimated time of arrival to the next destination/stopover
Ve hicle s ymbol
Example of selected map contents page 155
Turn list inserted in the Setup menu page 156
The map display modes can be changed page 151.
A crosshair with selection rectangle helps you select your destina-
tion with the aid of the map
page 148.
Route guidance is additionally shown by directional arrows in the
instrument cluster display (
page 113 or
page 114).
Tips
An underpass or a tunnel is shown by broken lines on the map
display up to a scale of 0.5 mile.
Map display with active side menu
The map display can be changed through the active
side menu.Fig. 152 Navigation: Map display with active side menu–Press the Map control button in the navigation menu.
– Press the control knob to switch to the side menu

fig.152.
– Select the desired submenu item by rotating and
pressing the control knob and make your changes.
– Press the button, to leave the map side menu.If you have activated the Zoom function
page 146 or the
crosshairs
page 149 in the active side menu, you have to press
the button twice in order to leave the map side menu.
A1AA AA4A9A:
RETURN
RETURN