AUDI A5 CABRIOLET 2010 User Guide
Page 11 of 364
Warning  light  in  the  instrument  cluster  display-1-
If  the  _L  warning  light  in the  i nstrument  clus ter  display  flashes,  this 
can  mean  one  of  two  things:  either  the  coo lant 
temperature is too 
high,  or  the  coolant 
level is too  low ~ page 29. 
If  the  needle  is well  in the  uppe r area  of the  gauge,  the  coo lant 
temperature  is too  high. 
Stop  the  vehicle,  switch  the  engine  off,  and 
allow  it to  cool. 
If th e  war ning  light  comes  o n ag ain af ter  driv ing  a 
short  distance,  contact  an  author ized  Aud i dea ler  or othe r qualified 
wor ksh o p. 
& WARNING 
•  Alway s observe  the  warn ing  in :::} page 272, "Engine  compart· 
ment ",  before  opening  the  hood  and  checking  the  engine  coolant 
level. 
•  Never open  the  engine  hood  if you  see  or hear steam,  or if you 
s ee  engin e  coolant  dripping  from  the  engine  compartment.  You 
could  burn yourself . Let the  engine  cool  off  first  so that  you  cannot 
hear or  see  any  steam  or engine  coolant . 
0 Note 
•  Mounting  add ition al  lights  o r accesso ries  in fron t of  the a ir inlets 
reduces  the  cooling  effect  of the  radiator . At  high  outside  tempera
tur es  o r high  engine  load,  the  eng ine  could  ove rhe at. 
•  The  front  spo iler  has  been  designed  to  properly  d istribute  the 
c oo lin g air  when  the vehicle  is moving.  If  the sp oi ler  is d amaged,  this 
co uld  reduce  the  cooling  eff ect  and  the  eng ine  could  then  overheat . 
Ask your  au thor ized  A udi dealer  for  assis tance .• 
Con tro ls  a nd e quip 
m en t  Vehicle 
OP-eration 
Instruments  and  warning /indicator  lights 
Tachometer  (engine  rev  counter) 
The tachomete r in dic ates  t he engine  RPM  (revoluti ons 
pe r mi nutes) . 
If engine  RPM drops  below  1,500,  you  shou ld  downsh ift  to  the  next 
lower  ge ar. T he  red  area  at  the  end  of  the  s cale  i ndi cates  max imum 
permissible  engine  RPM after  the  brea k-in  per iod.  Before  reaching 
t his  area,  move  t he  selector  lever  to  po sition  "D (Dr ive)" or  ease  yo ur 
foot  off  t he accelerator  pedal. 
0 Note 
T he tachometer  needle @~ page  8, fig.  2  should  o nly br iefly  be  in 
t he  red  zone:  yo u co uld  damage  your  eng ine! T he  beg inning  of  the  red 
zone  varies  depe nd ing  o n the  eng ine. 
~ For the  sake of the  environment 
Upshifting  early  saves  fuel  and  redu ces  engine  noise .• 
[S ET] button 
You  c an per form  d iffere nt  fu nctions  with  t his  but ton. 
Fig . 3  SET butto n in 
the  instrume nt  clu ste r 
Th e !SE TI bu tto n performs  the  fo llow ing f unct io ns: 
Vehicle  care  Do-it-yourselt service  iTechnical data  
Page 12 of 364
Instruments  and  warning/indicator  lights 
Switching  on  time , date,  temperature  display , and 
odometer 
Th e display appears  for approx imately  30  seconds w hen you press the 
ISE Tj button => page 9,  fig. 3 with  t he  ign it ion off. 
Starting  the  Auto-Check  sequence 
T he Auto -Check  system => page 26 constant ly monitors  certain  indi 
vidua l func tions a nd components  of  the  ve hicle whe n the  ign ition  is 
t u rne d on  and w hen the  vehicle  is mov ing. 
Wi th the ignit ion turned  o n, you can star t the  "A uto -Check sequence" 
by pressing  the 
! SET ] button . You can perfo rm  an Auto-Check 
sequence when  the veh icle  is station ary an d the  ig niti on  i s turned  o n 
or w hen the  veh icle  is mov ing slower  t han  3 mp h (5  km/h). 
Calling  up  the  dr iver  information 
A ye llow  or  red symbol  appears  in the  instr ument  cluster  display, 
u su ally  wi th a drive r message. T he  drive r mes sage disp lay disappea rs 
after  about  5 seconds. The driver  message can be d isp layed aga in by 
br ie fl y  pr essing the 
!S ET ] button. 
Setting  the  speed  warning 
By  press in g t he I SE T] bu tton br iefly, yo u ca n set  thres ho ld  1  of  the 
speed warn ing wh ile yo u are  driving => 
page 25. By maintaining  pres
su re on t he 
!SE TI but ton , you  dele te the  w arning  thres ho ld. • 
Digital  clock  with  date  display 
Digital  clock 
Fig. 4  Instrume nt 
clu ster:  t ime  an d date 
T he date,  t ime of  day, time  and  date format  can  be set  in the  rad io o r 
in the  MMI* . You can learn  more  about  this  in the  MMI  manual  or  in 
the  radio  user's  man ual. 
[ i ] Tips 
•  Th e digita l clock turns  on for  about  30  secon ds w hen the  dr iver's 
door  is opened. 
•  When the  ignition  is turned  off,  the  odometer  rea ding and the 
dig ital  clock with  date  display  can be sw itched  on for  about 
30  seconds  by press ing the 
[ SET I butto n=> page 9,  fig.  3.  • 
Fuel  gauge 
The f uel gauge wo rks on ly when  the  ignition  is on. 
W hen  the nee dle rea che s the  red a rea, the  war ning  ligh t  in t he ins tru 
ment  cl uster  will  illuminate => 
page 34 L.,. Th is means you  have 
a p pr oxi mate ly 2.1  gallons  (8  liters)  of  f uel left  in t he  ta nk . 
Time to 
r efuel! 
T he total  tank  capac ity  of  yo ur vehicle  is liste d in => page 342.  .,,  
Page 13 of 364
0 Note 
Never  run  the  tank  completely  d ry! An irregular  supply  of  f uel  can 
cause  engine  misfiring  and  fuel  could  enter  into  the  exhaust  system . 
T he  ca talyt ic conver ter  could  then  overhea t and  be  damaged .• 
Odometer 
The odometer  indicates  the  distance  driven. 
Fi g. 5  Ins tru m ent 
cl uster : odome ter 
Fig .  6  Instrume nt 
cl uster : reset  button 
The  d isp lay of  distance  driven  is s hown  in  kilometers  "km"  or  i n 
"miles" . 
•  USA models  - Miles 
•  Canada  models  -Kilomete rs 
Con tro ls a nd e quip 
m en t  Vehicle 
OP-eration 
Instruments  and  warning /indicator  lights 
The  un its  of  measure  (k ilomete rs/miles)  can  be  changed  in the  MMI 
or  us ing the  [ 
CAR] button  on  the  r adio con trol. 
Odometer /trip  odometer 
T he  odomete r sh ows  the  tot al number  of  kilomete rs or  mile s tha t 
have  been  driven  on  the  vehicle. 
Th e tr ip odomete r shows  the  distance  dr iven  si nce  it was  last  reset. 
It 
can  be  used  to  measure  short  d istances . T he  last  d ig it  shows 
distances  of  100  meters  or  1/10  of  a  m ile. 
Th e trip  odome te r c an  be  reset  to  zero  by pressi ng the  reset  bu tton 
[O.O )~ fig.  6. 
Malfunction  message 
If  there  is a  ma lf u nction  somewhere  in the  instrument  cluster, dEF 
will  appear  in th e trip  odomet er and  w ill stay  on.  Conta ct you r au tho
rized  Aud i dea le r to  have  the  p roblem  corrected. 
Immobilizer 
Whe n the  ign ition  is switched  o n,  the  data  on  the  ignition  key are 
scanned  automati cally. 
If  an  unauthorized  key was  used, 
SAFE is display ed  pe rmanently  in 
t he  o dome ter  display  field . The  vehicle  ca nnot  be  o per ated 
~ page 37. 
[ i ] Tips 
•  T he  date,  t ime,  and  distance  continue  to  show  for  about  30 
seconds  after  the  igni tion  is switched  off . 
•  The  odometer  turns  on  for  about  30  seconds  w hen  the  driver 's 
door  is opened . 
•  The  odometer  can  be  turned  on  for  approximately  30  seconds 
with  the  igni tion  of f by  pres sing  the [S ET] button ~ 
page 9, fig. 3 . • 
Vehicle  care  Do-it-yourselt service  iTechnical data  
Page 14 of 364
Instruments  and  warning /indicator  lights 
Warning/indicator  lights 
Overview 
The warning/indicator  lights  indicate  different  functions 
or a possible  malfunction. 
F ig . 7  Inst rum ent  cluster  with  wa rning/in dicato r lig hts 
Your vehicle  is equipped  with  several  important  warning  and indi
cato r lights  to  he lp yo u moni to r the  continued  re liable  ope ration  of 
your  vehicle=> &. 
I 
Dynamic steering * 
Electronic  power  control  => page 13 
=> page 13 
Electronic  Stabilization 
Program (ESP) => page 14 
AIR 
BAG 
USA model s: 
Airbag  system 
Canada model s: 
Airbag  system 
Tire pressure too  low * 
Left  t urn s ignal 
Safety  belt  Ma lfunction  Indicator  Lamp (MIL) 
adaptive  cruise control* 
D Hi gh  beam 
/  :   Lane assist (system  is ready) 
Lane assist (system  is not  ready) 
Power top  operation 
Right  turn  signal 
CRUISE 
USA models: 
Cruise control  activated 
-
Canada model s: 
Cruise  contro l activated 
=>page 14 
=> page 1 4 
=> page 14 
=> page 15 
=>page 15 
=>page 15 
=>page 122 
=> page 15 
:> page 15 
=> page 15 
=> page 51 
=> page 15 
=>page 15 
=> page 15 
USA models: 
Anti-lock  brake system => page 16 
(ABS) defective 
- 
Page 15 of 364
Canada models: Anti-lock  brake  sys-=>page 16 
tern  (ABS) defective 
PARK USA models: Parking  bra ke =>page 16 
BRAKE 
(® ) Canada model s:Parking  br ake 
=> page 16 
--
BRAKE 
USA models : Brake  malfunction :::> page 17 
<CD > 
Canada models: Bra ke  malfunction 
=> page 17 
& WARNING 
• Failure to  heed  warning  lights  and  other  important  vehicle 
information  may  result  in  serious  per sonal  injury or vehicle 
damage. 
•  Whenever  stalled  or stopped  for repair , move the  vehicle a safe 
di stance  off  the  road,  stop  the  engine,  and turn  on the  emergency 
flashe r 
=> page 66. 
•  The engine  compartment  of  any  motor  vehicle  is a  potentially 
hazardous  area . Before you  check  anything  in the  engine  compart
ment,  stop  the  engine  and  let  it  cool  down . Always  exercise 
extreme  caution  when  working  under  the  hood => 
page 2 72, 
" Engine  compartment " 
(I) Tips 
Many funct ions  a re mo nitored  by  the  Auto-Check  system=> page 26. 
Ma lfunctions  or  faults  w ill be  identified  either  with  a  red  symbol 
(pr io rit y 
1 -Dan ger!) or  wi th a ye llow  symbo l (priority  2 -War ning). • 
Controls  and  equip 
ment  Safety  first 
Instruments  and  warning
/indicator  lights 
App lies  to veh icles : w ith  Aud i dr ive  select 
Dynamic  steering 
If  the  ind icator  light() illumina te s  w hen  swi tching  on  t he  ig nition 
and  goes  ou t when  the  engine  starts,  dynamic  steering  is activated. 
If  the  ind icator  light 
r ill uminates  after  the  engine  sta rts,  a system 
ma lfunct ion  has  occurred . Yo u can  co ntinue  to  drive  caref ully at  a 
re duced  speed  to  a q ualified  workshop.  Steering  can  be  more  diffic ult 
or  sensit ive  tha n usual.  The  stee ring  w heel  may  a lso  be  at  an  angle 
when  driving  straight. 
& WARNING 
Have the  dynamic  steering  system  malfunction  repaired  as  soon 
as possible  by an author ized Audi d ealer or any qualified  workshop 
- risk of  accident! 
[ i ] Tips 
•  If  the  indicator  light ~ flashes,  dynamic  stee ring  is  being  re
initialized.  The  d river  info rmation  system  display  shows  the  words 
"Dynamic  steering : initialization" => 
page 32. 
•  The  dy namic  steering  stab ility  systems  a re not  availab le  in the 
event  of  a  system  ma lfunction .• 
Electronic  power  control ' 
This  warning/indicator  Light  monitors  t he electronic 
pow er control . 
The C'., warning/indicator  light  (E lectronic  Powe r Cont rol)  illumi 
nates  when  you  turn  o n the  ignition  as  a function  check . 
Vehicle  care  Technical  data  
Page 16 of 364
Instruments  and  warning /indicator  lights 
(I] Tip s 
If this  warning/indicator  light  illuminates  while you are driving, then 
there  is a malfunction  in the  engine  e lectronics.  Have the  ma lfunction 
co rrected  as soon  as  possib le by you r authorized  Audi dealer  or qua l
ified workshop .• 
Electronic  stabilization  program  (ESP)  . /> 
If  the <• indicator  lamp  b links whi le driving, the  ESP or ASR (Anti -Slip 
Regu lation)  is actively  regula ting. 
If the 
> indicator  lamp  illuminates,  the  system  has switched  the  ESP 
off.  In this  case,  yo u can  switch the  ignition  off and  then  on to  switch 
the  ESP on again . The system  is functioning  completely  when  the 
indicator  lamp  sw itches  off. 
If the  ind icator  lamp  illuminates,  the  ESP was  switched  off with the 
[ESP 
OFF ] button . 
ESP/ ABS f ault ! See  owner 's manu al 
If the  indicator  lamp  and  the  )ABS  indicator  lamp  illuminate  and 
the  driver  message  appears,  the  ABS or e lectronic  differentia l lock is 
ma lfunction ing.  This also  interrupts  the  ESP.  The brakes  still function 
with  their  normal  power,  but  ABS is not  act ive. 
Drive to  your  authorized  Audi dealer  immediately  to  have the 
ma lfunction  corrected. 
For more  information  abo ut  the  ESP::::> 
page 240.  • 
Airbag  system 
ffl (USA  models) l!lr (Canada  models) 
This warning/indicator  light  monitors  the  airbag  and  the 
pretensioner  systems . 
The I (USA models)/ !.!r (Canada  mode ls) warning  light  illuminates 
for  a few  seconds  each  time  you  switch  on  the  ignition. 
If the 
I (USA models) I !_~ -(Canada models)  warn ing light  does  not  go 
out,  or  if it  illumina tes while you are  d riving, o r if it s tarts  to  blink, 
then  there  is a  malfunction  somewhere  in the  system.  If  the  l ight 
does  not  illuminate  when  you swi tch on the  igni tion, this  a lso means 
there  is a malfunction . 
& WARNING 
If you  ha ve  a  malfun ction  in the  airbag system ,  contact  your 
a uthoriz ed Audi de aler immediat ely. Otherwi se the  airbag  or the 
belt  pr etens ioner  m ay  not  work  properly  in an  accident. • 
Appli es  to vehicles:  with  t ire p ress ure mon itor ing system 
Tire  pressure  monitoring  system  -telltale 
indicator  lamp  ) 
The warning/indicator  light  appears  in the  event  of  a 
significant  loss  of  tire pressure  or if there  is a malfunc
tion . 
The  indicator  light  _) illuminates  to  check the  function  when  you 
sw itch  on the  ignition. 
If the  'symbo l remains  on or blinks after  you switch  on the  ign ition, 
there  is a  loss  of tire  pressure  or a system  malfunction . If t here  is a 
system  malfunction,  see  your  author ized Audi dealer  as soon  as 
possible. 
Detailed  information  on  the t ire  pressu re monitoring  system  can  be 
found  in::::> 
page 314. •  
Page 17 of 364
Turn  signals ¢ ¢ 
The indicator  light  blinks  when you  use either  turn signal . 
Whenever  you  use the  left ¢i or the right¢ turn  signal,  the  indicator 
light  blinks.  When  you  use the  eme rgency flashers,  both  indicator 
lights  flash . 
If  one of the  turn  signa l light  bu lbs burn  out,  the  turn  signal  will  blink 
twice  as fast  as normal. • 
Applies  to  veh icles: with  la ne assist 
Lane  assist  (system  is  ready) /: 
The indicator  light  shows that  the  system  is ready to  use. A warning 
alerts  the  driver  when  the  vehicle  drives  over detected  lane boundary 
lines . 
More  informat ion  about  lane  assist=> 
page 132. • 
Applies  to  v eh icl es: with  lan e ass ist 
Lane  assist  (system  is  not  ready) I· 
The indicator  light  shows  that  the  system  is turned  on  but  unable  to 
send a warn ing. 
More  informat ion  about  lane  assist=> 
page 132. • 
Safety  belts ~ 
This warning/indicator  light  reminds  you  to  put  on your 
safety  belt. 
The l warning/indicator  light  illum inates when  the  ignition  is 
switched  on to  rem ind the  driver  and  (on  USA mode ls on ly) any fron t 
passenger to  put  on the  safety  belt . Additionally,  an audible  warn ing 
tone  will  a lso sound. 
Controls  and  equip 
ment  Safety  first 
In
strum ents  and  warning /indicator  lights 
For more  Information=> page 190, "Safety  belt  warning  light t". • 
Malfunction  Indicator  Lamp  (MIL) 
~ 
The  Ma lfunct ion  Indicator  Lamp  (MIL)  is part  of  the  On-Board  Diag
nostic  (OBD II)  system.  The symbol  lights  up when  the  ignition  is 
turned  on  and will  turn  off  after  the  engine  has started  and  has 
sett led at a constant  id le speed.  This indica tes tha t the  MI L is working 
properly. 
The warning  light  illuminates  when  there  is a malfunction  in the 
engine  electron ic system.  Contact  your  author ized Audi  dealer  and 
have the  malfunction  corrected. 
For more  information => 
page 21.  • 
High  beam ~D 
The aD warning/indicator  l ight  illuminates  when  the  high  beams  are 
on or when you use the  headlight  flasher . For more  informat ion about 
using  the  h igh  beams,  see=> 
page 67. • 
Cruise  control CRUISE (USA  models) /(,'J2 
(Canada  models) 
T he warning/ind icator  lig ht  illuminates  when  the  cruise  contro l is 
activated. • 
Vehicle  care  Technical  data  
Page 18 of 364
Instruments  and  warning /indicator  lights 
Anti-lock  brake  system  (ABS)  -- (USA  models)  /:' (Canada  models) 
This warning/indicator  light  monitors  the  ABS and  the 
electronic  differential  lock  (EDL). 
T he warning/ind icator  light  will  come  on for  a few  seconds wh en the 
ign it ion  is sw itched  on . The light  w ill  go out  after  an automatic  check 
sequence is completed . 
There  is  a  malfun ction  in  the  ABS  when: 
•  T he warning/ind icator  light  does not  illuminate  when  you  switch 
on the  ig nition. 
•  T he warn ing/ind icato r lig ht  does not  go o ut  a fter a  few seconds . 
•  The warning/ind icator  light  illuminates  while  dr iving. 
The  brake  syst em will  still  re spond  even without  the  a ssistan ce of 
th e AB S s ystem . See your authori zed Audi  d ealer  as s oon as 
possible t o restore  full  braking  performance. 
For more informat ion 
regarding  the  ABS=> 
page  245. 
The ABS warning  light  and  the  brake  warning  light  come  on 
together.  The ABS will  no t  work  and you will  noti ce a change  in 
brak ing  response and  performance. 
Malfunction  in  the  brake  system 
If  the  brake wa rning  light => page  17 and the  ABS warning  illuminate 
together there  may be a malfu nction  in the  ABS, and  the re may also 
be a malfunction  in the  b rake system  itself => 
& -
In  the  event  of  a malfunction  in the  brake  system the  wa rning/indi 
cator  light 
BRAKE (USA  models)/ ((D) (Canada models)  in the  instrument 
cluster  flashes . By pressing  the 
!SE T) button,  you  can bring  up  a 
dr iver message w hic h explains  the  malfunct io n  in  more  detail.  Please 
note => 
page  28.  Malfunction  in  the  electronic  differential  lock  (EDL
) 
The EDL works  toge ther  with  the  ABS . The ABS warning  light  will 
come on  if there  is a malfunction  in the  ED L system=> 
page  242 . See 
your  authorized  Audi  dea ler as soon as possible. 
& WARNING 
•  If  the , ~ .... (USA model s)/ :J (Canada  models) warning  light 
does not  go out,  or if  it  comes on while  driving, the  ABS s ystem  is 
not  working  properly . The vehicle  can then  be s topped only with 
the  standard  brake s (w ithout  ABS ). You will  not  have the  p rotec
tion  ABS p ro vi des . Cont act your  auth orized Audi  dealer  as s oon as 
poss ible. 
• USA model s: If the BRAKE warning  light  and  the ~ warning 
light  come  on together,  the  rear wheel s could  lock up first  under 
ha rd  braking . Rear wheel  lock-up  can  caus e lo ss of v ehicle  control 
and  an  accident . Hav e your  vehicl e repaired  immediately  by your 
author ized  Aud i dealer  o r a  qualified  workshop . Drive  slowly  and 
avoid  sudden,  hard  brake  application s. 
•  Canada  model s: If  the  br ake warning  light (CD) and  the  ABS 
wa rning  l ight 9 come on together , the  rear wheels  could  lock up 
first  under  hard  b raking.  Rear wheel  lock -up can cause loss  of 
vehicle  contr ol and  an  accident.  Have your  v ehicle  repair ed imme 
di ately  b y your  authorized  Audi  dealer  or a qual ified  workshop. 
Drive  slowly  and  avoid  sudd en,  hard  brake  applicati ons.  • 
Electromechanical  parking  brake 
~E (USA  models) /(®) (Canada  models) 
The warning/indicator  light  monitors  the  electromechan
ical parking  brake . 
With  the  parking  brake app lied and  the  ign ition  turned  on,  the 
wa rni ng/indicator  light  i lluminates.  Afte r the  ignition  has been 
tur ned off,  the  warning/ind icator  light  continues  to  illum inate  for 
about  30  seconds.  If  the  par king  b rak e is applied  with  the  ignition  _,,,,  
Page 19 of 364
turned off, the  warning/indicator  light  illuminates  for  about  30 
se conds. 
Th e  warn ing/ind icator  light  will  go  out  when  the  parking  brake  is 
re leased . 
If  the  war ning/indi cator  lig ht  flashes  cont inuo usly 
aft er applying th e 
park ing  brake,  braking  force  is  not  sufficient  to  prevent  the  ve hicle 
from  roll ing  unin ten tio na lly.  Please  note  the  following: 
•  If the  s lope  of the  g round  is too  steep  to  park  the  ve hicle,  the  addi 
tional  drive  message  appears 
Caution:  Vehicle  parked  too  steep . 
• In  the  eve nt  of  a  pa rking  brake  malfunction,  the  yellow ~ symbol 
appears  in the  instrument  cl uster  disp lay  and  the  drive r message 
Parking  brake  ma lfunction! is displayed. H ave  t he  malfunction 
repaire d as  soon  as  possible  by an  authorized  A udi dea le r or  any  other 
qualified  wo rkshop .• 
Brake  system BRAKE (USA 
models) 
/ {CD) (Canada  models) 
The warning/indica tor li ght  flashes  if  brake  fluid  level  is 
l ow ,  if  there  i s an AB S system  malf unctio n  or a p arki ng 
b rake  malfuncti on. 
The light  illum inates  whe n the  ignition  is turned  on.  It  goes  out  after 
th e  engine  ha s been  sta rted . Thi s  indi cates  tha t the  brake  war ning 
light  is functioning  properly . 
If  the  brake  warning  light  doe s not  light  up when  the  engine  is 
cranking,  there  may  be a  malfunction  in the  electrical  system.  In 
this  case, contact  an  authorized  Audi  dealer. 
If  the  brake  system  wa rning/ind icator  light  flashes,  there  is  a  brake 
system  malfunction . By press ing  the 
[SET ] button,  you  can  bring  up  a 
driver  message  w hich  expla ins  the  m alfu nct io n  in  more  det ail 
=>page 28. 
Controls  and  equip 
ment  Safety  first 
Instruments  and  warning
/indicator  lights 
If  the  ABS fa ils,  the  ABS war ning/ indicator  light sc-(USA 
mode ls)/  (C anada  models)  fl ashes  toge ther  w it h  th e  bra ke system 
warning/indicator  light=> 
&-
(USA mo dels):  If the  warning  light BRAKE and  the  warning  lig ht  illu
m inate  toge ther,  imme dia te ly  contac t you r autho rized  Audi  dealer  or 
qualified  workshop  to  have  all  brake  pads  inspected=> 
page  33. 
When the  ligh t  comes  on,  an  audi ble  war ning  signa l is al so  give n. 
& WARNING 
•  USA models: If  the BRAKE warning  light  and  the  warning 
light  come on together,  the  rear wheels  could  lock  up first  under 
hard  braking.  Rear wheel  lock-up  can cause lo ss of vehicle  control 
and  an  accident . Have your  vehicle  repaired  immediately  by your 
authorized  Audi  dealer  or  a qualified  work shop . Drive  slowly  and 
avoid  sudden,  hard  brake  applications. 
•  Canada  model s: If the  brake  warning  light (CD) and  the  ABS 
warning light :: come on together,  the  rear wheels could lock up 
fir st  under  hard  braking . R ear  wheel  lock -up  can  cause  lo ss of 
vehicle  control  and  an  accident.  Have your  veh icle  repaired  imme
diately  by your  authorized  Audi  dealer  or a qualified  workshop. 
Drive slowly  and  avoid  sudden,  hard  brake  applications . 
•  If the  brake  warning /indicator  light  doe s not  go out  after  a few 
seconds  and  the  parking  brake  released,  or lights  up while  you  are 
driving , the  fluid  level in the  brake  fluid  reservoir  is too  low.  If you 
believe  that  it  is safe  to  do  so,  proceed  immediately  at  low  speed 
to  the  nearest  authorized  Audi dealer  or  qualified  repair  facility 
and  have  the  brake  sy stem  inspected . 
•  Always  keep  in mind  that  after  several  brake  applications,  you 
will  need  greater  pressure  on the  brake  pedal  to  stop  your  vehicle . 
Do not  rely on  strained  brakes  to  re spond  with  maximum  stopping 
power  in critical  situations.  You must  allow  for  increased  braking 
distances.  The extra  distance  used  up  by fading  brakes  could  lead 
to  an  accident . • 
Vehicle care  Technical  data  
Page 20 of 364
Driver  information  display 
Driver  information  display 
Introduction 
General  notes 
The driver information  display  inside  the  instrument 
cluster  provides you,  the  driver, with much  useful  infor
mation. 
Fig.  8  Instrument 
cluster:  center  display 
Information  from  the driver  information  system  is shown  in the 
display  in the  center  of  the  instrument cluster. 
When  you  turn  on  the  ignition  and  while  you  are  driving,  some  func
tions  and  vehicle  components  are  scanned  for  their  operating  status.  Malfunctions  or  required  service  procedures  are  signaled  audibly  and 
shown  by  red and  yellow  lighted symbols  and  reminders to  the  driver 
in the  display. 
The  driver  is also  shown  information  about  radio  and CD operation 
and  directions  for  the  navigation  system*.  You can  find  additional 
information  on  these  subjects  in the  MMI manual. 
The  illustrations  in the  instrument  panel  display  differ  in some  of  the 
vehicles. 
The  driver  information  system  provides  the  following  functions:  Sound  system  display 
Outside  air  temperature 
Digital  speedometer 
Open  door- and  luggage  compartment  warning 
Service  interval  display 
Auto  Check  system 
Driver  information 
Speed  warning 
Trip  computer 
------- ---., 
::>page  19 
=>page  19 
=> page20 
::> page20 
=>page20 
=> page26 
=> page26 
=>page25 
=> page22 
_ _. 
Gearshift  selector  positions  Automatic  transmis-=> page  149 
sion 
[I] Tips 
In  the  event  of a malfunction  either  a red  or yellow  icon appears  in the 
display . Red  symbols  indicate 
Danger=> page 27. Yellow  symbols 
indicate  a 
Warning => page  31. •