torque AUDI A6 1995 C5 / 2.G AEB ATW Engines Valvetrain Servicing Workshop Manual

15-46


Note:
While turning camshaft, valves could hit pistons that are at TDC. Verify
that no piston is at TDC. Valves and/or pistons may be damaged.
Note:
Follow all procedures for removing and installing toothed belt Page 13
-
29
.
Note:
When installing the ribbed belt, make sure it is seated correctly on the
pulleys.
Tightening torques - Align marking on camshaft gear with marking on cylinder head cover.
- Align marking on vibration damper to that on lower toothed belt cover.
- Install toothed belt (adjust valve timing) Page 13
-32
.
- Install ribbed belt and ribbed belt tensioner Page 13
-15
.
Component
Tightening torques
Camshaft gear to camshaft 65 Nm (48 ft lb)
Ribbed belt tensioner to mounting bracket 25 Nm (18 ft lb)
Pa
ge 19 of 51 Valvetrain, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.15.3

15-49


Note:
When installing ribbed belt, make sure it is seated correctly on the pulleys.
Tightening torques - Using 3241/3 camshaft fitting tool and 3241/1 pressure sleeve, press
oil seal in to stop.
- Install Camshaft Position (CMP) sensor -G40- Page 15
-38
.
- Install upper toothed belt cover.
- Install ribbed belt and ribbed belt tensioner Page 13
-15
.
Component
Tightening
torques
Shutter wheel for Camshaft Position (CMP) sensor -
G40- to camshaft 25 Nm (18 ft lb)
Housing for Camshaft Position (CMP) sensor -G40-
to cylinder head 10 Nm (7 ft lb)
Pa
ge 22 of 51 Valvetrain, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.15.3

15-59

Tightening torques

Component
Tightening
torques
Bearing cap to cylinder head 10 Nm (7 ft lb)
Hydraulic chain tensioner to
cylinder head 10 Nm (7 ft lb)
Shutter wheel for Camshaft
Position (CMP) sensor -G40- to
camshaft 25 Nm (18 ft
lb)
Housing for Camshaft Position
(CMP) sensor -G40- to cylinder
head 10 Nm (7 ft lb)
Ribbed belt tensioner to
mounting bracket 25 Nm (18 ft
lb)
Camshaft gear to camshaft 65 Nm (48 ft
lb)
Pa
ge 33 of 51 Valvetrain, servicin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.15.3