wiring AUDI A6 1996 C5 / 2.G 01V Transmission Read Measuring Value Block E18/2 Workshop Manual
Page 24 of 42
01-246
Notes for display field 3 of display group number 004:
The input signals of the Multi-function Transmission Range (TR) switch -F125- can be checked at the Transmission
Control Module (TCM).
Display field 3: (from left to right)
L 1 L 2 L 3 L 4
Wiring connection to Transmission Control Module
(TCM) -J217- Terminal 36 of -
J217- Terminal 8
of
-J217- Terminal 37 of -
J217- Terminal 9
of
-J217-
Pa
ge 24 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14
Page 36 of 42
01-256
Display group
number Display
field Description
Test
requirements Spec. value on
V.A.G1551
display Corrective actions
009
1 Engine torque
2) While driving
1)
Nm
- See DTC table, DTC 18265 /
P1857 page 01
-45
Continue
2 Engine RPM With engine
running approx. 0...8200
RPM - See DTC table, DTC 17968 /
P1560 page 01
-45
1) While driving, a second mechanic is required to read specifications. 2) While driving in one gear, the indicated shift torque remains constantly high, since no engine torque reduction is required.
Note for display field 1:
The signal for actual engine torque is transmitted by the Engine Control Module (ECM) to the Transmission Control Module
(TCM) via the CAN-bus wiring.
Pa
ge 36 of 42 Read Measurin
g Value Block
(scan tool function 08
) for transmissions with h
ydraulic control -E18/2-
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.14