wiring diagram AUDI A6 1996 C5 / 2.G ATW Engine Additional Signals User Guide
Page 26 of 27
24-175
Example 3:
Using the DTCs stored in the memories, you
have determined that none of the control
modules are sending or receiving signals.
Control
module
DTCs stored in DTC
memories:
1
Powertrain databus faulty
2 Powertrain databus faulty
3 Powertrain databus faulty
- Switch ignition off.
Electrical Wiring Diagrams, Troubleshooting & Component Locations - Disconnect control modules connected across bus wires and check
bus wires for a short circuit to B+ and Ground (GND).
Pa
ge 26 of 27 Additional si
gnals, checkin
g
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.24.5