lock AUDI A6 1997 C5 / 2.G ATW Engine Readiness Code Workshop Manual

01-67


Readiness code
The readiness code appears as an 8-digit display
in measuring value block 086, display field 1.
Each of the 8 digits is allocated to a specific
exhaust related system.
During a test sequence which must be performed
completely, On Board Diagnostic (OBD) checks
the function of each of these systems and then
changes the character assigned to it in the 8-digit
indication from "1" to "0" once test has been
performed successfully.
When the readiness code is generated after a
successfully completed test sequence, it reads "0
0 0 0 0 0 0 0" (measuring value block 086,
display field 1).
If a single test is completed entirely, but indicated
as "not OK", a DTC will be stored in DTC
memory. Check DTC Memory Page 01
-16
.
Pa
ge 1 of 35 Readiness code
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.8

01-69

Read readiness code


Test sequence

- Connect VAS5051 tester or VAG1551 scan tool
and select control module for engine electronics
using "address word" 01 Page 01
-10
. Ignition
must remain switched on.
Rapid data transfer
HELP
Select function XX

When indicated on display
- Press buttons -0- and -8- to select "Read Measuring Value Block" and
press -Q- button to confirm input.
Read measuring value block
Q
Enter displa
y group number XXX

When indicated on display
- Press buttons -0-, -8- and -6- to select "display group number 086" and
press -Q- button to confirm input.
Read Measuring Value Block 86
1
2
3
4

When indicated on display
- Check readiness code in display field 1

Specification: 0 0 0 0 0 0 0 0
Pa
ge 3 of 35 Readiness code
11/21/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU06.01.8