light AUDI A6 1998 C5 / 2.G 01E Transmission Clutch Release Mechanism Workshop Manual
Page 8 of 9
30-34
- Coat area -a- of collar with Lithium grease G 052 150 A2 before
mounting the slave cylinder into the transmission housing.
- Lightly coat contact surface for plunger to clutch release lever using
copper grease, e.g. Z 381 351 TE.
- Insert clutch slave cylinder into mounting hole in transmission housing,
keeping it as far as possible in line with direction of operation of push
rod, then tighten bolt (arrow).
Pa
ge 8 of 9 Clutch release mechanism, servicin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.30.2