light AUDI A6 1998 C5 / 2.G 01E Transmission Final Drive Differential Assembly Workshop Manual

39-122


Parts catalog 4 -
Shim "S2"
Note thicknessAdjustment overview Page 39
-150
5 -
Outer race for small tapered roller bearing
1) Knocking out Fig. 1Pressing in Fig. 2
6 -
Inner race for small tapered roller bearing
1) Pulling out Fig. 3Pressing in Fig. 4
7 -
Bolt, 60 Nm + turn 45 further
Always replaceAllocationLightly tighten bolts then tighten diagonally
to correct torque
Pa
ge 4 of 15 Differential, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.17

39-126


Fig. 1 Knocking outer race of small tapered roller bearing out of
housing
- After removing check shims for damage.

Fig. 2 Pressing outer race of small tapered roller bearing into
housing (press against stop)
- Position outer race using VW 295 and light even blows with a hammer.
- Drive in onto stop as shown in illustration.
Pa
ge 8 of 15 Differential, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.17