light AUDI A6 1998 C5 / 2.G 01E Transmission Final Drive Flange Seals Workshop Manual
Page 3 of 3
39-3
Installing
- Fill space between sealing and dust lips with
sealing grease G52 128 A1.
- Lightly oil outer circumference of seal.
Tightening torques 1) 90 equals to a quarter turn - Drive in seal for drive flange.
Pressing-in depth (factory): 5.5 mm
Pressing-in depth when re-installing a used drive flange (repairs):
6.5 mm
- Install drive flange and drive axle.
Component
Nm
Drive flange to transmission
10 + 90
1)
Drive axle to drive flange M10 80
Heat shield for drive axle 25
Pa
ge 3 of 3 Drive flan
ge seal, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.1