AUDI A6 1998 C5 / 2.G 01E Transmission Final Speedometer Sender Workshop Manual

39-4


Speedometer sender -G22-
and drive wheel for
speedometer sender,
removing and installing

Transmission installed

Removing and installing speedometer sender
-G22-

Removing and installing drive wheel for speedometer sender -G22-
Removing: - Pull connector off sender -B-.
- Press sender retainer down, turn and pull out sender.
- Replace O-ring -A-.
- Detach drive axle from left drive flange -B-.

- Unscrew bolt -A-. Secure drive flange with a drift to prevent it turning.
- Remove drive flange and seal -C-.
Pa
ge 1 of 2 S
peedometer sender -G22- and drive wheel for s
peedometer sender, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.2

39-5


Installing:
Note:
Fit the drive wheel carefully onto the differential, making sure that it is kept
straight. Do not use force; the drive wheel can break easily.
Follower lugs engage in differential housing grooves. - Using a screwdriver, pry out drive wheel for speedometer sender -D-
on alternate sides at the follower lugs (arrows).
- Install drive wheel for speedometer sender so that follower lugs
(arrows) face toward seal.
- Replace seal for drive flange and install drive flange Page 39
-1 .
- Top up oil in transmission and check oil level Page 34
-39
.
Pa
ge 2 of 2 S
peedometer sender -G22- and drive wheel for s
peedometer sender, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.2