ignition AUDI A6 1998 C5 / 2.G 01V Transmission TCM Code Workshop Manual

01-180


Transmission Control Module
(TCM), coding (scan tool
function 07)

Procedure

- Connect VAS5051 tester or V.A.G1551 scan
tool and select Transmission Control Module
(TCM) using "address word" 02 page 01
-40
.

Ignition must remain switched on.Rapid data transfer
HELP
Select function XX

Indicated on display
Print out control module identification:
- Switch on printer by pressing print button (indicator lamp in button
lights up).
- Press buttons -0- and -1-.
- Press -Q- button to confirm input.
8D0927156BT AG5 01V 2.8l 5V USA 1416Coding 00002
WSC 00000

Indicated on display
Control module identification is displayed:
Depending on the control module version (software version), the control
module may indicate a different identification than shown in this example.
For allocation of control module
Pa
ge 1 of 9 Transmission Control Module
(TCM
), codin
g (scan tool function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.11

01-182

Note:
Coding can only be performed with ignition on
and selector lever in position "P" or "N".
Accelerator pedal must be in idle position.
Vehicle must be stationary and engine must not
be started. Rapid data transfer
Q
07 Code control module

Indicated on display
- Press -Q- button to confirm input.
Code control module
HELP
Input code number XXXXX

Indicated on display
Note:
Find control module identification in coding tables starting on page 01
-
184
and enter it into tester. The Dynamic Shifting Program (DSP) should
remain on at all times if possible.
Note:
DTC memory in the control module is automatically erased following
coding. - Enter code
- Press -Q- button to confirm input.
-
Press button.
Pa
ge 5 of 9 Transmission Control Module
(TCM
), codin
g (scan tool function 07
)
11/20/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.AT02.01.11