check oil AUDI A6 1998 C5 / 2.G AEB Engine Motronic MFI And Ignition System
Page 32 of 135
24-22
 Evaluation of display group 32  Display group: 
32  
  
  
Display fields: 1 
+ 2  
Possible cause  
Corrective action  
O2S control 
learning value:  
-26.0 to -8.0 %   
Engine oil dilution (when partial load learning value 
is normal,   display field 2) 
- Change engine oil, or carry out extensive road 
test and check again. 
  
 
Fuel pressure too high- Check fuel pressure regulator   Page 24
-93
  
 
Fuel injector leaking- Check fuel injectors   Page 24
-87
  
 
Oxygen Sensor (O2S) heater malfunction- Check O2S heater   Page 24
-27
O2S control 
learning value:  
8.0-26.0 %   
Intake air leaks ("false air") or exhaust manifold 
leaks (when partial load learning value is normal, 
 display field 2) 
 Repair Manual, 1.8 Liter 4
-Cyl. 5V Turbo 
Engine Mechanical, Engine Code(s): AEB, ATW, Repair Group 26
    - Check intake air system for leaks   Page 24
-
97
 
- Check exhaust system for leaks:
  
 
Fuel pressure too low- Check fuel pressure regulator   Page 24
-93
  
 
Oxygen Sensor (O2S) heater malfunction- Check O2S heater   Page 24
-27
Pa
ge 32 of 135 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1 
Page 71 of 135
24-55
      
Engine operating conditions (engine 
electronics), checking
 
     
Note:  
     This test checks whether the Motronic Engine 
Control Module (ECM) -J220- recognizes the 
engine operating conditions. 
     
Required special tools and test equipment  
     
VAG 1551 or VAG 1552 scan tool with VAG 
1551/3 adapter 
     
Test requirements  
     Engine oil temperature at least 80  C (176 
F)  
     
Checking  
     
-  Connect VAG 1551 or VAG 1552 scan tool and 
press buttons -0- and -1- to insert "Engine 
Electronics" address word 01 (with engine 
running at idle)   Page 01
-7 . 
Rapid data transfer 
HELP
Select function XX
    
Indicated on display  
-  Press buttons -0- and -8- to select "Read Measuring Value Block" 
function 08, and press -Q- button to confirm input. 
Pa
ge 71 of 135 Motronic Multi
port Fuel In
jection 
(MFI
) and i
gnition s
ystem
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU02.24.1