wheel AUDI A6 1999 C5 / 2.G 01E Transmission Final Drive Flange Oil Seals Workshop Manual

39-99

Removing

- Remove rear section of exhaust system
(rearward of exhaust pipe clamp(s)):

Repair Manual, 2.7 Liter V6 5V BiTurbo
Engine Mechanical, Engine Code(s): APB, Repair Group 26


- Detach left and right-hand drive axles from rear
final drive, and lay to one side:

Repair Manual, Suspension, Wheels,
Steering, Repair Group 42.


- Remove drive flange. To loosen securing bolt, screw two bolts into
drive flange and hold with bar to prevent it from turning.
- Place drip tray V.A.G 1306 underneath and drain transmission oil.
- Pull out drive flange using the bolts already screwed in.
Pa
ge 2 of 4 Drive flan
ge oil seals, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.13

39-101


Repair Manual, Suspension, Wheels, Steering, Repair Group 42.

Repair Manual, 2.7 Liter V6 5V BiTurbo Engine Mechanical, Engine
Code(s): APB, Repair Group 26

Tightening torque - Drive in oil seal for right drive flange onto stop with mandrel 2062,
ensuring that seal is kept straight.
- Bolt on driveshaft.
- Align exhaust system free of stress.- Top up gear oil in rear final drive and check oil level Page 39
-80
.
Component

Nm
Drive flange to final drive 25
Drive axle to flange shaft M8 40

M10 77
Pa
ge 4 of 4 Drive flan
ge oil seals, re
placin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.13