technical data AUDI A6 1999 C5 / 2.G 01E Transmission Input Shaft Assembly Workshop Manual
Page 2 of 12
35-2
Note:
When installing new gears Page 00
-3 , Technical
data
1 -
Gearbox housing
Servicing Page 34
-127
2 -
Circlip
3 -
Thrust washer
4 -
Needle bearing for 4th gear
Mark before removingDo not interchange with needle bearing for
3rd gear Oil with gear oil before installing
5 -
4th speed sliding gear Before installing, insert spring Fig. 1After installing, check axial clearance with a
feeler gauge (0.15-0.35 mm)
Pa
ge 2 of 12 In
put shaft, disassemblin
g and assemblin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.35.1