torque AUDI A6 1999 C5 / 2.G AEB ATW Engines Pistons And Connecting Rods Workshop Manual

13-53


Pistons and connecting rods,
disassembling and assembling
1 -
Nut for connecting rod bolt
30 Nm (22 ft lb) + additional 1/4 turn (90 )Always replace connecting rod bolt -13-Grease thread and contact surfaceTo measure radial play, tighten to 30 Nm
(22 ft lb) but not any further
2 -
Pressure relief valve Tightening torque: 27 Nm (20 ft lb)Opening pressure: 2.5-3.2 bar (36.25-46.4
psi)
3 -
Oil spray nozzle For piston cooling
4 -
Connecting rod bearing cap Mark -B- to indicate which cylinder each
cap belongs to
Installed position:Marks -A- point toward belt pulley side
Pa
ge 1 of 9 Pistons and connectin
g rods, disassemblin
g and assemblin
g
11/18/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.GE02.13.4