ignition AUDI A6 1999 C5 / 2.G ATQ Engine Basic Setting Workshop Manual

01-66


Basic Setting (function 04)

With ignition on and engine at standstill, the
following operations can be performed using
"function 04", basic setting:

Adapt throttle valve control module to Engine
Control Module (ECM) Display group 060 (
Page 24
-142
)

Vehicles with automatic transmission:
Adaptation of kick down function of accelerator
pedal position sensor to ECM Display group
063 ( Page 24
-161
)

With ignition on and engine running, the
following operations can be performed using
basic setting:

Adaptation of oxygen sensor control Page 24
-83


Troubleshooting via targeted activation and
deactivation of oxygen sensor control
Display group 099. For this, observe notes on
page Page 24
-79
.
Pa
ge 1 of 5 Basic Settin
g (function 04
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.4

01-68
Depending on desired operation:

- Switch ignition on.

or

- Start engine.Rapid data transfer
HELP
Select function XX

When indicated on display:
- Press buttons -0- and -4- to select "Initiate basic setting" and press -Q-
button to confirm input.
Initiate basic setting
Q
Input displa
y group number XXX

When indicated on display:
Example:
Note:
After selecting this display group number, the EVAP valve is closed and
A/C compressor switched off. - Input desired display group number.
- Press buttons -0-, -0- and -0- to select "display group number 000" and
press -Q- button to confirm input.
Basic Settin
g 0
Q
1
2
3
4
5
6
7
8
9
10

Indicated on display:
Pa
ge 3 of 5 Basic Settin
g (function 04
)
11/23/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.FU05.01.4