check oil AUDI A6 2000 C5 / 2.G 01E Transmission Final Drive Differential Remove And Install Workshop Manual
Page 8 of 8
39-119
Installing
Installation is carried out in the reverse order,
when doing this note the following:
- Insert differential.
- Replace O-ring for cover for final drive and oil
when installing.
- Fit cover for final drive on final drive housing and
tighten in diagonal sequence to 25 Nm.
- Replace drive flange oil seals Page 39
-98
.
- Fill space between sealing and dust lips with
sealing grease G52 128 A1.
- Install drive flanges and tighten to 25 Nm.
- Top-up gear oil in rear final drive and check oil level Page 39
-80
.
Pa
ge 8 of 8 Differential, removin
g and installin
g
11/19/2002 htt
p://127.0.0.1:8080/audi/servlet/Dis
play?action=Goto&t
yp
e=re
pair&id=AUDI.B5.TM03.39.16