buttons AUDI A6 2005 C6 / 3.G RNS_E Navigation System Manual

Drives43
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
CD changerApplies to vehicles: with Audi cd changerLoading your CDs into the CD changerLoading just one CD
– Press the button . As soon as the CD changer
is ready for you to load a CD, the red LEDs on the inside
sides of the CD tray (not shown in the illustration)
start to blink.
– Insert the CD (printed side up and straight) into the CD
tray . The CD automatically loads into the next free slot
in the CD changer. The LED in the button will stop
blinking.Loading all CDs
– Press and hold the button for longer than 2
seconds.
– Wait until the red LEDs on the inside sides of the CD tray
(not shown in the illustration) start to blink.
– Now insert your other CDs (printed side up and straight)
o n e a t a t i m e i n t o t h e C D t r a y . Th e L E D s i n e a ch b u t t o n
will stop blinking once a CD has been loaded into the
slot.
Loading the CD into a specific empty slot
– Press the button . The LED in the button of
any empty slot will start to blink.
– If you want to load a CD into a specific slot, you can also
p r e s s a b u t t o n , w h e r e t h e L E D i s not lit a n d i n s e r t y o u r
CD.
– Wait until the red LEDs on the inside sides of the CD tray
(not shown in the illustration) start to blink.
– Now insert your CDs (printed side up and straight) into
the CD tray .
Loading the CD into a specific slot
– Press the button . The LEDs in the buttons
for the slots that already have CDs loaded blink.
– If you press an illuminated button that is not blinking
then that CD will be ejected.
– Remove the ejected CD from the CD tray .
Fig. 42 Audi cd
changer: Loading CDs
LOA D
A2
A;
A;
A3
LOA D
A2
A1
A;
A3
LOA D
A2
A
A3
A1
A;LOA D
A2
A A3
A1

RADIO 56RADIOIntroductionSelecting radio function
The radio settings can be selected via the
function button.Fig. 53 Display: Main radio menu– Press the function button
page 16. The main
radio menu (station list)
fig.53 or the previous active
radio function menu appears in the display.
– Press one of the control buttons
page 17 to move to
the appropriate submenus to
fig.53.
The following submenus are available in the radio
function:
FM

AM
FM
AM
A1
A
Control button
functions 
fig. 53
Radio submenus

Memory
Memory list

Band
FM
AM
Satellite Radio
(XM Radio* or Sirius Radio*)

Sound
Balance
Fader
Tr e b l e
Bass
DSP
a)b)

Volume settings (Navigation info)
a)Digital Signal Processingb)Vehicles with a BOSE® sound system in conjunction with an AudioPilot do
n o t h av e a DS P f un c t io n . In t hi s c ase y o ur ve h icl e is e quip p e d wi t h d y n a mi c
noise compensation
page 94.
Tuning
(FM/AM range)
Tu n e u p
Tune down
Seek up
Seek down
Store station
Scan
A1AA A

RADIO 62Sound control buttonSound settingsStarting on
page 92, you can read how to select the sound
settings for the radio function.
Tuning control buttonManual station selection
With the manual settings option, even weak stations
can be set and saved.Fig. 59 Radio: Manual tuning (forward)
–Press the Tuning control button in the FM/AM radio
menu.
– Select >> (“Tune up”)
fig.59 or << (“Tune down”) in the
Display by rotating the control knob.
– Press the control knob to set the desired station
frequency.Briefly pressing the control knob will change the frequency in small
steps. If you hold the control knob down, the frequency changes
more rapidly. When you release the control knob, the frequency
adjustment stops.
W h e n y o u h a v e s e l e c t e d a r a d i o s t a t i o n m a n u a l l y, y o u a r e s h o w n t h e
station even after switching to the main Radio menu.
If you have selected a weak station in the FM band, it does not
continue to appear on the station list as a selection after changing
radio stations.
The control wheel functions always refer to the frequency band that
is currently set.

RADIO65
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
Setup Radio (FM/AM range)Opening and closing SetupFig. 64 Setup Radio: Main menu– In a Radio menu, press the button to open the
main Setup menu for the radio function
fig.64.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup Radio:

Station reception
page 65


Station display
page 66


Delete stored stations
page 67The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Station reception (FM/AM range)
The selectivity for the automatic seek function can also
be adjusted.Fig. 65 Setup Radio: Station reception
SETUP
SETUP

RADIO 70Setup Satellite radioOpening and closing SetupFig. 70 Setup Radio XM: Main menu– In a radio menu, press the button to open the
main Setup menu for satellite radio
page 65, fig.64.
– Press the button again to close the main Setup
menu again.The following settings are possible in Setup Radio:

Sorting stations
page 70


Station info
page 71


Category filter
page 72


Receiver serial number
page 68


Delete stored entries
page 73
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Applies to vehicles: with Satellite Digital Audio Radio ServiceSorting stations
S t a t i o ns c a n b e s o r t e d b y c a t e g or y o r ch a n ne l n u mb e r.Fig. 71 Setup Radio XM: Sort station by
SETUP
SETUP

CD/SD 74CD/SDIntroductionGeneral
C D a n d M P 3 o p e r a t i o n i s s e l e c t e d b y u s i n g t h e
function button.Depending on the equipment in your vehicle, you can use the
function to play an audio CD in the DVD navigation drive,
use a CD changer*
page 79 or the MP3 player integrated into the
Navigation System page 83.
You switch between the CD and MP3 function by using the control
button with the Source function
page 77.
Selecting CD functionFig. 74 Display: Main CD menu (example of a list of tracks)– Insert an audio CD into a drive
page 34
– Press the function button
page 16. A main
audio menu
fig.74 or the previously active function
menu appears in the display.
– If necessary, press the control button with the Source
function and select CD
page 77.
– Press one of the control buttons
page 17 to move to
the appropriate submenus to
fig.74.
CD/SD
CD/SD
CD/SD
A1
A4

CD/SD 76
– Press the function button
page 16. A main
audio menu
page 74, fig.74 or the previously active
function menu appears in the display.
– If necessary, press the control button with the Source
function and select MP3
page 77.
– Press one of the control buttons
page 17 to move to
the appropriate submenus to
page 75, fig.75.
The following submenus are available in the MP3
function:
CD/SD
A1
A
Control button
functions 
page 74,
fig. 74
MP3 submenus

MP3 list
CD
Card 1
Card 2
Navigation DVD
Empty
Audio
CD ROM
Unreadable

Source
CD
MP3

Sound
Balance
Fader
Tr e b l e
Bass
DSP
a)b)

Volume settings (Navigation info)
a)Digital Signal Processing

MP3 ctrl
Forward
Reverse
Next
Pre viou s
Random
Scan
Name (Details)
A1AA A

CD/SD77
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP The following submenus are available in the MP3
Setup function:
Source control buttonSelecting audio sourceFig. 76 CD/SD: List of available audio sources–Press the Source control button in the CD or MP3 menu.
– Select the desired equipment by rotating and pressing
the control knob.Depending on vehicle equipment, the following choices are avail-
able:

CD


MP3
Various submenus are available, depending on the equipment
selected.
b)Vehicles with a BOSE® sound system in conjunction with an AudioPilot do
n o t h a v e a D S P f u n c t i o n . I n t h i s c a s e y o u r v e h i c l e i s e q u i p p e d w i t h D y n a m i c
Noise Compensation
page 94.
MP3 Setup submenus
Press the
function button in
the MP3 function
page 88
Repeat
With subdirectories
Tr a c k d i s p l a y
Categ. display
SETUP

CD/SD79
General operation
RADIO, CD
NAME, TEL
NAV, INFO
CAR, SETUP
CD list control buttonApplies to vehicles: with CD changerCD selectionFig. 78 CD: Selecting CDs from the changer–Press the CD list control button in the CD menu.
– Select the desired CD
fig.78. The CD title list is
displayed.
– Select your track as necessary.The selected CD location appears in the title line.
If there is no CD in one of the slots in the changer, “Empty” is
displayed in the CD list.Audio CDs (CD-A) can also be played in the DVD Navigation drive. If
there is a CD changer* in the vehicle, an audio CD inserted in the
DVD Navigation drive can be played over CD 7.
Sound control buttonSound settingsStarting at
page 92, you can read how to select the sound
settings for the CD function.

CD/SD 82When the button is pressed again, the scanning stops and the title
currently being played will continue to play.
Tips
If you have set Repeat fo r a s i n g l e Tra c k in Setup CD, you cannot use
the Scan function
page 82.
Setup CDOpening and closing SetupFig. 83 Setup CD Repeat CD (main Setup menu)– I n a C D m e n u , p r e s s t h e b u t t o n t o o p e n t h e m a i n
Setup menu for the CD function
fig.83.– Press the button again to close the main Setup
menu again.
The Repeat options
page 82 can be set in Setup CD.
The sound and tuning settings and the brightness of the display can
be entered using the control buttons
page 169.
Tips
We recommend that you enter these settings when the vehicle is
stationary. In this way, you can be sure that you are not unneces-
sarily distracted from traffic when performing the procedures that
follow. Please note
page 9, “Notes on Traffic Safety”.
Repeating CD–Press the function button
page 16 in the CD
menu.
– Select Repeat
fig.83.
– Select CD, off or Tr a c k.

Function CD: The current CD tracks are repeated.


Function off: The Repeat function is switched off.


Function Tr a c k: The CD track currently entered is repeated.Tips
The Repeat options can be combined with the Random function.
You can find more information in the description of the Random
function
page 81.
SETUP
SETUPSETUP